开云体育

Hello Nick, Thanks for checking. That is what I got too. Jim N2ADR

I found it for Flex. You 're right , there is a difference.

Hello Nick, Thanks very much for the bug report, protocol documentation and patch. I don't usually get reports of this quality. But there seems to be a difference between the Kenwood IF command and

I decided as follows : As a result :

The monitor program shows an error when Quisk responds to an IF request:

hi Jim, PTT and frequency sync is wprking, still trouble withvthe audio. Enjoy your ski trip. regards, Gerrit 73, PA0MIK

For Hamlib NET be sure to set the "port" to localhost:4532. This is the hostname and port number. I will be away for a week on another ski trip. Jim N2ADR

hi, I am trying to configure FreeDV with QUISK but till now not very successfull. Main problem are the hamlib settings for PTT. As rig I have selected Hamlib NET ctl I am using FreeDV 2.0.0-dev2,

Mario, I looked back to your message from last year regarding clicks in the TX IQ stream... I do hear those clicks as well, rather regularly.? Interesting observations... in your other message you

Actually, that looks like the effects I see from the Quisk cut and splice re-sampling logic. ?I'm not sure I understand what the "reference frequency" for the error detection is. It seems to depend

Hi, Yes, that is correct. Multus SDR, LLC. transceivers are fixed at a sample rate of 96K. 73, Ron / W4MMP

Interestingly, the built-in PCM device in the Multus radio isn't allowing a sample rate of 48k.? I'll have to test with the homebrew QSE and Xonar card, but that'll take a few days as that project

Hi Jim, Thanks for the reply. I am using 73p2 file hl2b5up_main.rbf - this is identified as 4 RXs by SparkSDR If I load hl2b5up_cicrx.rbf with 10 RX and no TX then the TX does not operate, as

Please check the version of the gateware. The Tx level control should provide 7.5 dB of adjustment. There is gateware that enables more receivers but omits Tx. Be sure you are not using this

Did you try at a sample rate of 48ksps? Jim N2ADR

This looks like a problem with resampling in the sound card. For example, if a card only works at 44.1 ksps, and you request 48 ksps, the card will resample to the different rate. Depending on how it

Ok, It's working again! Many thanks and 73.

Delete ( or rename ) both json files in the Documents folder and try to run Quisk again.

Hello to everyone, I want to run the latest version of Quisk SDR, in Windows 10 Pro 64b. Initially, after installation I was able to run Quisk v4.2.41 but now he did not want to launch at all. Next I