|
Call sign
Thanx¡73 Fred Hollendorfer, W0SP Wheat Ridge, CO -- de Fred W0SP
|
|
What are the settings to get Fldigi to control my FTDX10?
3
I had to do a rebuild and can't get fldigi to control my FTDX10. Radio works fine using CAT in WSJT-X so I know USB communications will work. I am getting a good waterfall in Fldigi and PSK31 decodes. When I try CQ I can hear the tones on the headphones on the radio so audio in that direction is working but the transmitter is not keyed. The computer also isn't controlling band or frequency. I have tried all of the Rig dialogs and can't get any to work. I suspect rigCATdoesn't work because I don't have a .xml file for the radio. For the others where possible I have set to FTDX10. When I go to the .xml file download site listed in the documentation there isn't a file for the FTDX10. Google hasn't been all that helpful on suggesting an alternative file to use. It looks like things are working except for controlling the radio. Dave W2IJL
|
|
2 instances of fldigi running - Bug report
Just for info, I doubt anyone else would want to do this. Linux Bookworm 12.9, fldigi 4.2.06.20 I run 2 instances of fldigi quite often. Usually to concurrently decode two different modems. I do however also use remote SDR download & playback to test modem/flmsg/flamp etc performance. Have found that the playback of a wav file on one instance, stops the other instance from decoding the AF stream from the rig, but I think it does still respond to an RSID. ie there is some switchable shared resource that is being used by multiple instances. Report for possible interest only. Cheers Bob VK2YQA
|
|
CTY-3503 Country Files - 15 January 2025
The Country (CTY) Files were updated on 15 January 2025: https://www.country-files.com/cty-3503-15-january-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-15-january-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 15 January 2025 (CTY-3503) VER20250115, Version entity is Corsica, TK Added/changed Entities/Prefixes/Callsigns: * CE6RFP is Chile, CE in ITU zone 16 * AT44I is Antarctica, CE9 in CQ zone 39, ITU zone 69 * W4ATD is United States, K in CQ zone 4, ITU zone 8 * KZ4DP is Alaska, KL * K9P is Puerto Rico, KP4 * LU1MAW/D, LU4CIC/D and LU8GTA/D are all Argentina, LU * LU9XEK/W is Argentina, LU in ITU zone 16 * R100GL, R900, UE82M and UE82ML are all European Russia, UA * R8MB/1 is European Russia, UA in CQ zone 17, ITU zone 20 * UA9AR/P is Asiatic Russia, UA9 * RK4PA/9 is Asiatic Russia, UA9 in ITU zone 20 Removed Entities/Prefixes/Callsigns: * TO4A in Martinique, FM * GB5BBC and GB9OO in Scotland, GM * HC5CW/8 in Galapagos Islands, HC8 * IZ3QBN/CRT in Italy, I * KQ4CTD and W1ESE in United States, K * R2024DX, RL1I/P and UE34DX in European Russia, UA * UB4CLH/0 in Asiatic Russia, UA9 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us
|
|
OK, using Winetricks, I installed VB6, and a few missing other files. I was still getting errors about missing or misinstalled OCX files. I had to retrieve them at OCXme.com. Finally, VARA FM materialized briefly ¡ but shut down quickly. A buzzkill. The error is something about advapi32.dll. I tried a different version, but getting the same thing. ¡°Call from 7BDAACE8 to unimplemented function ADVAPI32.DLL. PerfEnumerateCounterSet, aborting wine ¡¡± Then it calls for debugger which didn¡¯t run. I¡¯m close, just not there. Any help appreciated. Going to copy this to linuxham group as well. 73, Jamie WB4YDL PS - while running Winetricks for missing files, this error box came up This may be the source of why the VARA install Pi App script would just stall. I never got this box when I ran it - only with Winetricks. Tried wineserver -k and -k9, but it never stopped these boxes. But when I clicked OK, it woul take off and continue to complete the requested fill. Again, RPi4 with 32bit Bullseye.
|
|
at http://www.w1hkj.com/alpha/linsim/ linsim-2.0.5.03.dmg linsim-2.0.5.03.tar.gz linsim-2.0.5.03_setup.exe readme.dmg.txt readme.txt EVENTS * add event log dialog * fix exit thread handler bug * add events OFFSET correction * change sign of correction * correct resampling of source wav 73, David W1HKJ
|
|
[winfldigi] Minor Issues with Linsim Channel Simulator-Early tests and thoughts
A new development version of linsim has been posted at http://www.w1hkj.com/alpha/linsim/ linsim-2.0.5.02.dmg linsim-2.0.5.02.tar.gz linsim-2.0.5.02_setup.exe readme.dmg.txt readme.txt Contains the following changes since 2.0.5 commit 6822b34b692ec2d0e0a5c6fbb3ab0aa0f0fd25fa Author: dave-w1hkj <w1hkj@...> Date: Fri Jan 12 09:38:00 2024 -0500 alpha commit 35df54a5602df2749d235f781092c694e1855dad Author: dave-w1hkj <w1hkj@...> Date: Sat Jan 11 19:40:20 2025 -0600 OFFSET correction * change sign of correction * correct resampling of source wav commit 2bf1720a6d407187c40ad45f31ceb1274aca2b0f Author: dave-w1hkj <w1hkj@...> Date: Wed Aug 9 20:10:39 2023 -0500 fix fltk UI * fix failure to correctly display check box element commit d218c58f66e886767da50ea677e6a541f535c3d1 Author: dave-w1hkj <w1hkj@...> Date: Tue Aug 30 12:34:57 2022 -0500 fix autoupdate * autoupdate screws with the version numbering convention used by linsim This should correct the bugs reported below. 73, David W1HKJ On 1/11/25 12:58, Robert Johnk via groups.io wrote:
|
|
Hi. I'm sure I had all this working in the past, but not now....... Not helped by issues with my main PC preventing reliable access to it. That is fully disconnected, cold and dead for now. Fldigi 4.2.06 with Flrig 2.0.05 on LMDE 6 running on an 8 core intel based machine, a Dell XPS laptop with 8G RAM, using external USB connected sound device, and serial port DTR to key the radio, a TS870s. Using Fldigi/Flrig for "normal" working is fine, but attempting to create a macro to send a CWID and "ONLY" a CWID, and I'm failing... I'm sure this has cropped up before in the list, but attempting to create a macro to send a CWID and "ONLY" a CWID, regardless of the prevailing mode that was being used I can't make work, after some 40 minutes faffing about, so hear I am. This is the contents behind a freshly assigned "CW ID" Macro button... <TXRSID:off> <PUSH> <MODEM:CW> <TX> <CWID> <RX> <POP> <TXRSID:on> It fails miserably... Firstly it doe not always put the rig into TX! Sometimes it will for a few attempts, then it'll not bother, but sends audio each and every time. (Debugging this with the rig on low power into a load, while using the default audio device for the TX audio, so hopefully no QRM being sent.) It always sends a RSID (TXID button here is enabled by default, and is not seen to be disabled while the macro runs.) Then a burst of Olivia 8/250 (the mode that is present before invoking the macro) then does the CWID, and goes back to recieve. The indicated mode does not change in the lower left display of Fldigi either. Each individual macro function works exactly as advertised, but not it seems when combined into one file. In this case. What have I missed this time? I.e. How to force a macro to execute sequentially, as it is shown in the editor. I just want it to key the radio, send an unadulterated CWID without any TXID or burst of whatever other digimode was being used, then go back to RX restoring the mode that was in use before the macro was invoked. As earlier. "Normal" Fldigi usage is fine. As are the usual macros for calling answering sending info, logging and closing QSO's etc. Confused again and getting fed up with it. 73. Dave G0WBX. -- Created on and sent from a Unix like PC running and using open source software:
|
|
I'm running fldigi 4.2.05.24 on a RaspberryPi4 on Raspbian 10 buster. The station runs 24/7 and several times a week when I remote in to the Pi I find fldigi is no longer running. This evening I was actually looking at the display when it happened. I had entered a command, and it timed out dues to open squelch, reported that in the receive pan then immediately aborted. Anything I can look for to help troubleshot this issue?
|
|
Wonder if you would review this again Dave. Same behaviour in 4.2.06.19 (yeah I am slow...) What I didn't make clear in my OP was with "Retain tx freq lock" enabled, the operational expectation is that the RX freq would shift to meet the RSID centre, but leave the TX frequency where it is. If "Retain tx freq lock" is disabled I expect the TX and RX to shift together. (which is what it does) Note there us differing action too if the modem changes vs not. Please try a few RSID's of the same modem, then try changing the modem. Cheers Bob On 19/8/24 20:22, w1hkj wrote:
|
|
CTY-3502 Country Files - 10 January 2025
The Country (CTY) Files were updated on 10 January 2025: https://www.country-files.com/cty-3502-10-january-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-10-january-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 10 January 2025 (CTY-3502) VER20250110, Version entity is Bulgaria, LZ Added/changed Entities/Prefixes/Callsigns: * EA7CA is Canary Islands, EA8 * TO8AN is St. Martin, FS * GB2KW is Scotland, GM * GB9KW is Wales, GW * KC0RKB, KF5JC and WA6QDQ are all Hawaii, KH6 * AC1RU and KD9CVY are both Alaska, KL * LU6DJ/D, LU6DM/D, LU8DCH/D, LU8EMD/D, LW5EVI/D and LW9EVV/D are all Argentina, LU * LU1YY/V is Argentina, LU in ITU zone 16 * R8FF/P is in ITU zone 29, not ITU zone 30 * R8FF/P is in CQ zone 16, not CQ zone 17 * RA8CP/P is Asiatic Russia, UA9 * RC1BM/P is Asiatic Russia, UA9 in CQ zone 16 Removed Entities/Prefixes/Callsigns: * EA3HSD/P in Spain, EA * FO/NX1P in Marquesas Islands, FO/m * W4ATD in United States, K * K7DN, KN6EQR, KQ4UZD and N8XUL in Alaska, KL * R8XF/P, R9JQ/6, RN3QOP/4 and UA9XL/P in European Russia, UA * CF2I in Canada, VE Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us
|
|
I been using fldigi for years on my Raspberry Pi station computer. It worked fine until a few months ago. Since I was having a great time on SSB DX I let it go, but I would like to be able to use it again. Symptoms: The rig interface doesn't work, it will not cause the frequency to change, and it does not follow the frequency on the transceiver. fldigi does not interface with flrig. I tried that as an alternative and nothing. flrig controls the rig fine but fldigi does not "see" flrig. There is no waterfall. It appears the audio is not getting to fldigi. As a comparison, I ran JS8Call and QSSTV (I've forgotten it's real name) and they both decode correctly. JS8Call controls the rig. fldigi is 4.1.20 flrig is 1.4.4 PiOS is Buster Pi is a 400 I have attached screenshots of the rig and audio configurations. I have run out of ideas on how to diagnose this. Suggestions please. 73, Bruce, W4BRU
|
|
I guess I cannot use fldigi on sequoia. Mac wont open it. Is there a concise step-by-step manual to load linux on my mac and then load fldigi ? I am basically computer illiterate. I miss fldigi. Thanks! John AB8O
|
|
Flirig stopped working with my FT991A after installing the latest fldigi software
I run FLDIGI, WSJTX, and FLRIG on a Windows 10 Pro Intel NUC. A couple of days ago, I downloaded the latest FLDIGI program, and after attempting to run it, my FLRIG software stopped recognizing the FT991A transceiver. I had previously used FLRIG with the FT991A by selecting the FT991 rig instead of the FT991A, which never worked. I have reinstalled all the pertinent drivers, and I can now run WSJTX successfully by choosing the FT991 transceiver directly. Has anyone else encountered this issue before, and has there been any successful solutions? I own numerous transceivers, and while FLRIG has had problems with several of these units, I've always managed to get the software working. I'm looking forward to hearing back from you. 73, Joe (aka Jose) Berrios, B.S., M.S., RETIRED WB2BWU
|
|
Call sign. K9TWC Robert Hadley. [email protected].
5
Requesting membership. No email with call sign.
|
|
fldigi on MacOS 15.2
3
Hello, I purchased a new MacMiniv M4. Now I am having the issue on my Mac when starting fldigi that I am always bothered by a pop-up message asking for Microphone access. How to overcome it? In the SystemsSetting I granted already Microphone access to fldigi without success. On this net I was reading about: codesign --force --deep --sign - /Applications/fldigi-4.x.xx.app Event this is not revolving the matter. Any help is welcome. 73 Jens
|
|
I just installed FLrig 2.0.05 on a Pi3B+ running Bullseye. WiringPi is also installed, and the gpio command works. My previous FLrig (1.3-ish) had a PTT-GPIO configuration panel. It didn't work for me, but I had hopes it might in this new version. The panel is missing altogether in the new version. I can select Config > Setup > PTT-GPIO, but it just takes me to a similar menu lacking the GPIO option. Anybody have some knowledge / wisdom to share? Thanks, Eric
|
|
#fldigi #hamlib Hamlib 4.6 not working
7
#fldigi
#hamlib
The current release of Hamlib is now version 4.6 fldigi hamlib control does not work with my Yaesu FT-890. When I click Initialize, nothing happens and hamlib becomes unchecked. Hamlib NET rigctl does work with my SDR. The Yaesu FT-890 does work with Hamlib 4.5.5. I tried fldigi 4.2.06 and fldigi 4.2.06.17 I am using a Raspberry Pi 5 and Dietpi debian bookworm. I have a USB to RS232 cable.
|
|
Icom IC-7100 USB Driver
16
I thought I had a site providing some serious help on this issue, but, so far, I'm still searching for that site I can't find in the browser history. So. Does anyone have some definitive information concerning installing a usb driver for Linux? In my case, Linux Mint 22. Apparently, Github has something named completely different and unrecognizable regarding this issue. But again, I've lost track of it. Thanks and 73
|
|
CTY-3501 Country Files - 02 January 2025
The Country (CTY) Files were updated on 02 January 2025: https://www.country-files.com/cty-3501-02-january-2025/ For installation instructions, start at: https://www.country-files.com/ Hover your mouse over the word Contest in the menu, then select the software you are using. To install the file, follow the link to your software at the top of the page. If you are interested in a bigger CTY.DAT for everyday logging, you can get it here: https://www.country-files.com/big-cty-02-january-2025/ Note that the release notes (and Version Entity) for this larger file are different than what is shown below. There is a separate link to them. As a reminder, there is an RSS feed of the latest country file announcements: https://www.country-files.com/feed/ Here are the release notes: 2 January 2025 (CTY-3501) VER20250102, Version entity is Bonaire, PJ4 Added/changed Entities/Prefixes/Callsigns: * N0VAO, W0GG, W9CTY and WD8DII are all United States, K in CQ zone 3, ITU zone 6 * N7ML is United States, K in CQ zone 4, ITU zone 6 * AI8L, K1AF, KA4RUR, KB9SCT, KF9MT, KK7TZP, KN4SLP, N2GJ, N2UR and W9BED are all United States, K in CQ zone 4, ITU zone 7 * AE4GW, AE4M, AK4QR, K1SPD, K4CCT, KB2UQS, KD5PCK, KI5ZQZ, KN4JGH, KO4NOL, KZ4IT, N4AER, N5DF, NT0Y, W4AUB, W4BQK, W4KAM, W4NYZ, WA6CW and WB4KUU are all United States, K in CQ zone 4, ITU zone 8 * K5ADR, K5YDR, K7KHZ, K8VAN, KE5MHV and W7VOA are all United States, K in CQ zone 5, ITU zone 8 * N7DKL is Alaska, KL * W4I is Puerto Rico, KP4 * R9FCS/4 and R9JAB/6/P are both European Russia, UA * RV3DSA/0 is Asiatic Russia, UA9 in CQ zone 19, ITU zone 34 Removed Entities/Prefixes/Callsigns: * KK4MQM/C6A in Bahamas, C6 * GB0GTS in Scotland, GM * AA5UZ, AG2TH, AK4I, K0IE, K0NW, K0SB, K4MQM, K7UPJ, K9GS, K9OR, KA9A, KB8KMH, KC6UCN, KH6NO, KI4BIY, KI4ZZJ, KT4DW, KU4H, N0GAF, N0MU, N7CR, N9SZ, NH6Z, W0ZZ, W3FU, W4KD, W4PGM, W4YEM, W7HJ, W8DX, W8HOT, W8ZM, W9BS, WA4AA, WA4USA, WB8PAF, WB9IRF and WB9PRG in United States, K * L73HAT/H in Argentina, LU * R100R, R100RA, R100RN, R100RP, R100RR, R100RS, R100RV and R9XD/6 in European Russia, UA * RX9SR/2 in Kaliningrad, UA2 * R100RB, R100RE, R100RU and R7HJ/0 in Asiatic Russia, UA9 Though I am subscribed to this reflector so that I can make these announcements, I do not see most messages posted to it. If you have any comments or corrections to the country file, please contact me directly. 73 - Jim AD1C -- Jim Reisert AD1C, <jjreisert at alum.mit.edu>, https://ad1c.us
|
Image Name
Sat 8:39am
Sat 8:39am