开云体育

Dave this version gives this error on my Linux Mint LMDE 6 machine: main.cxx:128:10: fatal error: scripts.h: No such file or directory ? 128 | #include "scripts.h" ????? |?????????

I setup a computer to try and run 2 separate radios with different soundcards but the same software. I setup different users for each radio. I have a 746pro and a 7300. The 7300 works fine. The 746

at https://www.w1hkj.org/alpha/fldigi/ fldigi-4.2.06.25.tar.gz <https://www.w1hkj.org/alpha/fldigi/fldigi-4.2.06.25.tar.gz> 2025-03-21 07:41 4.9M

FLAMP will not indicated a "CONNECT" status unless both ARQ and XMLRPC have connected. Use of both --arq-server-address/port and --xmlrpc-server-address/port have been set to unique values for each

Debian is not a parent of ArchLinux, so ArchLinux is definitely not a copycat...examine both the package management, file locations, etc. [email protected]> wrote: choice of GUI...and is based on

Instead of downloading Fldigi and the rest of the ham programs, try downloading the installer from KM4ACK or Andy's Ham Linux. I use KM4ACKs version of installer. It covers about anything Ham radio.

But Manjaro is a good choice. It's easy to install, comes with your choice of GUI...and is based on ArchLinux....i.e. ALL good. Es vy 73 on de Baab w9ya [email protected]> wrote: the desktop

While Arch Linux does not come with a pre installed GUI, you can install the desktop environment of your choice and then install WSJT-X and Fldigi. Both are available in the Arch User Repository. With

I am using a Raspberry Pi 400 with my FT-991A?? not exactly what you have..but it's a single cable connection..for audio and CAT. I also use Linux Mint and it is a good choice for someone coming

From hard won experience with Linux and USB-Serial adapters. Bite the bullet, and buy some "genuine" FTDI chipset based devices. They have unique USB serial numbers, that can be used with 'UDEV

About the CAT interface and FLRIG ... I used the same settings that I use on my other two RP and I just kept trying to use

The port to use may show up as USB or ACM Before you turn on the radio with USB cable connected, open a terminal and type ls /dev/tty* this will show all tty ports turn on radio again run ls

Thanks everyone for the info! My learning continues :) [email protected]> wrote:

I think you should be aware that Linux makes a distinction between a USB port and a serial port at a DB9 or DB25. It is even diferent in the devices in /dev folder of available devices. USB ports are

"Dan KC2STA via groups.io" <dan.ziolkowski@...> wrote: My mistake, tired old brain mis-thinking again. Yes, the FT-950 CAT is done via a USB->serial lead and the audio device is

" it will probably appear as /dev/ttyUSB0, although the 0 could be another" That's not the signalink, that would be the serial port for CAT Thanks Dan KC2STA [email protected]> wrote:

PS:?? There's more. Ive just found that the Squelch functionality with Olivia 8/250, is a bit dysfunctional too. The squelch sometimes seems to be always open, regardless of the SQL button

On Sat, 15 Mar 2025 06:16:38 -0700 "Joseph Brault, KC9LFP via groups.io" <kc9lfp@...> wrote: With the Signalink you basically have an external modem in there, a TI PCM290x series

Hi again. Well, this is very strange. I renamed the entire .Fldig files folder, and started up 4.2.06.24 in it's /src folder from the command line. After going through the basic configuration,

Joseph I have been using Linux Mint Debian Edition for many years now. I have had no problem using my SignaLink on my Yeasue rig. I also run all the NBEMS software natively, including NetLogger. My