Re: DigiRig, flrig, and a Yaesu FT-747GX

I still have not gotten FLRig to communicate with my radio

On Tue, Nov 19, 2024, 8:42?AM Dave, W1HKJ via <w1hkj=[email protected]> wrote:

?Turn off all other serial access to the transceiver/digirig before starting and configuraing flrig.? Suggest rebooting the computer before starting flrig.

reboot computer

turn on transceiver

start flrig

configure flrig

start WSJT-X and set up to use "flrig" as the transceiver interface

start JS8Call and configure similar to WSJT-X

The will allow fldigi, JS8Call, and WSJT-X to operate simultaneously, all with transceiver control via flrig.

73, David, W1HKJ

On 11/16/24 09:13, Riley Gossling, KF0QMQ via wrote:

Yeah the strangest thing is that I have cat control through JS8Call and WSJT-X working fine?

Re: fldigi 4.2.06.07 posted at

#53661

开云体育

Philip, latest version of Flrig (that I have) is here:

I should state that I am just signing and notarizing the Fldigi apps that have already been compiled by David until he can get his Apple Developer ID.

WSJT-X_Improved apps that are notarized and compiled for Apple chips can be found at:

Look for the files that end in M1.zip. The Plus version is most like WSJT-X in terms of layout. AL_Plus is optimized for laptops (which is what I use) and Widescreen is optimized for large monitors.

For JS8Call and Gridtracker, I would approach their developers directly. Both programs are on?. I’m willing to help out but don’t want to get crosswise with those developers.

On Nov 19, 2024, at 12:37?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:

Gary,

Hello. I was very happy to see your email.

I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the “side loading” issues.
It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.
I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?

Is there anything I can do to help??

Thanks,
Philip
AC4O

On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:

Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:

On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:

Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour

<BkQDYSNrQiHSpWo5.png>

? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
?????Should only require a single response to the "use microphone" dialog.

Re: flamp not connecting to fldigi

#53660

Try this, see if there is another process using the default local address. I do not know if the 127.0.02 address is used by your system you may need to change it to something else.

#!/bin/bash

CMDS="--arq-server-address 127.0.0.2 --XMLRPC-server-address 127.0.0.2"

FLDIGI $CMDS &
sleep 4
FLAMP $CMDS &

Re: fldigi 4.2.06.07 posted at

#53659

开云体育

Gary,

Hello. I was very happy to see your email.

I have a Mac Studio with an M2 Max chip currently running with MacOS 14. I am holding off upgrading to MacOS 15 due to the “side loading” issues.

It sounds like this has been taken care of for Fldigi and Flarq. I am not sure who all did what, but thank you and everyone so much.

I also run FLrig, WSJT-X, GridTracker2, RUMlogNG, and sometimes Js8call. ?I see that RUMlogNG is in the App store and is not an issue. Do you have any info on these other programs and how I could get notarized versions of them for an M2 Mac?

Is there anything I can do to help??

Thanks,

Philip

AC4O

Show quoted text

On Nov 19, 2024, at 11:08?AM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:

Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:

On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:

Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour

<BkQDYSNrQiHSpWo5.png>

? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
?????Should only require a single response to the "use microphone" dialog.

Re: fldigi 4.2.06.07 posted at

#53658

开云体育

Notarized versions of Fldigi-4.2.06.07 and Flarq-4.3.9 for MacOS 15 are here:

On Nov 19, 2024, at 10:44?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:

Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour

<BkQDYSNrQiHSpWo5.png>

? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
???? Should only require a single response to the "use microphone" dialog.

fldigi 4.2.06.07 posted at

#53657

开云体育

Note:
? - added SCAMP mode
? - added additional time scales to fmt mode; 4, 8, 16, 24 and 48 hour

? -? MacOS users on MacOS > 13.x.x will have to ignore the "malicious" software warning during first execution.
???? Should only require a single response to the "use microphone" dialog.

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53656

开云体育

?Turn off all other serial access to the transceiver/digirig before starting and configuraing flrig.? Suggest rebooting the computer before starting flrig.

reboot computer
turn on transceiver
start flrig
configure flrig

start WSJT-X and set up to use "flrig" as the transceiver interface
start JS8Call and configure similar to WSJT-X

The will allow fldigi, JS8Call, and WSJT-X to operate simultaneously, all with transceiver control via flrig.

73, David, W1HKJ

On 11/16/24 09:13, Riley Gossling, KF0QMQ via groups.io wrote:

Show quoted text

Yeah the strangest thing is that I have cat control through JS8Call and WSJT-X working fine?

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53655

Can you explain what that means please?

Show quoted text

On Tue, Nov 19, 2024, 7:21?AM N5VMO Pat via <n5vmo00=[email protected]> wrote:

Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =)

RS-232 configuration in Digirig 1.9

--
73's Pat? N5VMO

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53654

Remember to do NULL MODEM PIN SWAP on the RS-232 ( DB-9 ) on PINS?2 and 3 SWAP ....... VERY IMPORTANT?on FT-637's =)? ?I know I have one as well ..... bought a NULL MODEM ADAPTOR form mine and leave it on the rig and saves buying a special cable sometimes?hard to find =)

Show quoted text

RS-232 configuration in Digirig 1.9

73's Pat? N5VMO

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53653

I have not tried that. I would like to exhaust all other options before opening it up and modifying it, since the logic levels selection works fine with other software.

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53650

I believe so, but I can try messing with them again.?

I'm using a Digirig with homemade cables.

https://forum.digirig.net/t/cable-for-yaesu-ft-747/4282

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53648

A note, the tiny10 installation was on the same computer I had been trying to get working with linux, the windows 11 installation was a different computer.

Re: DigiRig, flrig, and a Yaesu FT-747GX

#53647

Alright I've tried installing the latest flrig software on both tiny10 (a stripped-down version of windows 10) and actual windows 11 and I get the same errors.

This leads me to believe the issue is with my Digirig setup, but I know others have used their digirig with flrig and I don't have any issues with WSJT-X or JS8Call.

Any other ideas?

Re: Scripting Assistance

#53643

Sorry... I'm trying to write a script that starts a program that was installed in a CrossOver Bottle. I can get the script to start CrossOver but I cannot get the script to start the program that's been installed in the Bottle.

Joel, W4JBB

Re: Scripting Assistance

#53642

I dont understand what you're trying to achieve.

flamp not connecting to fldigi

#53641

I'm running a Linux Mint box with fldigi 4.2.06 and flamp 2.2.14. fldigi is set to start flamp, which it does. Regardless of which program starts first, flamp shows NOT CONNECTED status. It's working fine on another system running on a Raspberry Pi 4. I've tried reinstalling and restarting from new flamp config file. Obviously, I'm missing something but have no idea what. Any suggestions appreciated!

Re: Linux Recommendation - Work is a RHEL/Windows Shop

#53640

Mint is just fine.. or Ubuntu as well - I use them both.

It's not a matter of experience per se - it's one of preference.? You can really get under the covers with any distro.

73,

Glenn

WA6BJQ

Show quoted text

On Sun, Nov 17, 2024 at 6:47?AM Joel Black - W4JBB via <joel.b.black=[email protected]> wrote:

Thanks... I think I'll use Mint until I can get more experience under my belt playing around under the hood.

?

Joel - W4JBB

Re: Scripting Assistance

#53639

Sorry, I may have caused some confusion...

I am trying to write the scripts on my Linux laptop. I was only giving an example of what I had successfully done on my Mac.

Joel, W4JBB

Re: FLRIG 2.x not usable on my new Mac mini M4 with my Yaesu FT-991A

#53638

I have the exact same problem, never found a solution. 1.4.7 works but not 1.4.8 and above. Have compiled the software but with no success - beach ball still keeps spinning.

BTW! I have an Intel Mac