¿ªÔÆÌåÓý

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. Linuxham
  2. Messages
Expanded Topics Messages Polls
Date
Re: FLDIGI MAC RTTY crashing

 

Which program do you have controlling the rig (CAT)? I use Rumlog and Fldigi but have Fldigi controlling CAT. I've had problems with RL controlling CAT and definitely a problem if both apps are trying to control the rig.
?
Mike
AG7AB
Re: FLDIGI MAC RTTY crashing

 

¿ªÔÆÌåÓý

I am operating at less then HALF the rated RTTY power of the amplifier. ?I don¡¯t know why power would cause FLDIGI to crash. Anyone else having this problem?
Ray
W8LYJ?

On Dec 6, 2024, at 8:34?PM, Chuck Reti WV8A via groups.io <wv8a@...> wrote:

?
RTTY transmission is full duty cycle, always key-down. What happens if you throttle back your output power to about half of what you're doing now? There's nothing about RTTY as an audio mode that should affect the software that's generating it.
?
Chuck
WV8A
Re: FLDIGI MAC RTTY crashing

 

RTTY transmission is full duty cycle, always key-down. What happens if you throttle back your output power to about half of what you're doing now? There's nothing about RTTY as an audio mode that should affect the software that's generating it.
?
Chuck
WV8A
Re: flrig 2.0.05 remote xml_client

 

Same result with QMX as rig and client compiled 2.0.05.85 (alpha)
FLDIGI MAC RTTY crashing

 

¿ªÔÆÌåÓý

I use Mac version FLDIGI with RUMlog for logging. FLDIGI crashes when running with RTTY. I use RUMlog macros and EOM
Ray?
W8LYJ
Re: [winfldigi] MFSK / THOR tests

 

¿ªÔÆÌåÓý

In the US Thor-25 may be used on any frequency allocated for digital modes.? I have not assigned an RsID for the mode but will do so after the mode specification is finalized.? I am experimenting with smaller flush_length bytes to reduce transmission overhead; 20 seem to work as well as 40.? These are required to avoid decode errors at the beginning of the data stream.

You can use a video text at the beginning of the transmission to assist others in recognizing the mode:



David

On 12/6/24 08:40, Bobby Chandler via groups.io wrote:

Dave,

What freqs for Thor25?

Bobby/N4AU

On 12/6/2024 7:49 AM, Dave wrote:
Thanks Barry.? I would appreciate your doing some real world testing with THOR-25.? My bench tests show it to give >99% copy with PathSim/LinSim Mid-Latitude Disturbed simulation.

SCAMP is intended to be compatible with an Arduino H/W implementation of the same signal.? The developer intends this to be used for emergency comms with very low power field units.? He provided me with a prototype of the hardware implementation.? I do not think he designed the signal as an FT8 replacement, but there are some who are testing it as such.

Davd

On 12/6/24 07:07, K3EUI Barry via groups.io wrote:
Dave
?
We who use THOR appreciate all of the work you put in to make it better.
?
My experience using THOR22 on HF NBEMS nets (PaNBEMS, MidAtlantic NBEMS) on 80m and 40m in the early morning hours is that it can copy checkins much faster with fewer data loss than other modes.
?
THOR has the advantage of being able to copy even if you are mistuned (something rookies often do).
?
We found THOR11 works well if the band is crowded (like a RTTY contest) or if there is severe fading.
THOR22 is our common checkin mode, with THOR32 our common traffic mode.
?
?
So how might THOR25 fit in our nets on HF?
We advise participating stations to turn off the digital squelch and to disable any ¡°noise reduction¡± or ¡°noise blankers¡± or notch filters in their modern radios.
?
MFSK22 and 32 also work well, but if mistuned by a tone (15 Hz) we fail to copy.
?
?
?
Many of us were wondering if any future work will be done to have the OFDM modes return?
We had a lot of experience with OFDM narrow modes on 80m and 40m and noted that if the S/N was not above some minimum value, we got lots of missed data.?
?
?
And what about SCAMP?
A few of us have been playing with that new (alpha) mode on 80m and 40m.
SCAMP is interesting to watch - and very narrow bandwidth.
Is scamp competing with ft8 as a chat mode (slow speed)?
?
agn, TU Dave
de k3eui. Barry
Pa NBEMS and Mid-Atlantic NBEMS net manager
?
?

--
n4au@...
Re: MS apps under Ubuntu WINE

 

Yes , I fully agree . LM is also one of my favourite Linux distros as well as ZORIN? os ,also an Ubuntu derived distro.
?
Frank , EI7KS
Re: flrig 2.0.05 remote xml_client

 

... and with QDX, running 2.0.05 server compiled from source on 6.6.39-current-rockchip64 #1 SMP PREEMPT Thu Jul 11 10:49:22 UTC 2024 aarch64 GNU/Linux
and client 2.0.04 from package on xubuntu 24.04. All speeds have been tried...
?
73 Anders
Re: MS apps under Ubuntu WINE

 

I find that ADIF Master and DXAtlas run quite nicely on WINE. They are my remaining "indispensable" Windows apps. I use Linux Mint in the shack daily and have not regretted the switch from Win11.

GL,
Wayne, W0ZW
Re: MS apps under Ubuntu WINE

 

Another recommendation for Crossover and this time for Linux.

t is as James said, a reasonable license fee, and it is solid and it works well. Even some complex Windows apps run on it. Another good thing about Crossover is that you get support from them. There were a few apps that needed special files to work, and they figured that out and got them going for me.

Rick Kunath, K9AO
Re: MS apps under Ubuntu WINE

 

Paul,
?
When Win 10 came out I moved to Mac but I still had a need professionally and personally for some windows applications. ?I used the Parallels solution for years but they too were big into money and their licensing sucks. ?
?
I recently moved to Crossover for Mac and love it. ?Crossover runs on Linux and the Crossover team is a major contributor to the Wine project. ?Yes, it cost me some money but their licensing is per user with multiple machines. ?To me it was worth the money for the ease of installation and the peace of mind. ?I run Winlink and VARA FM and Microsoft Visio with no issues and will be experimenting with some Motorola programming software. ?
?
Submitted for 'what it's worth' - worked well for me. ?And, BTW, I have a Mac Pro trash can running Mint and will be adding Crossover to it as well. ?Agree with Bob below - Mint is a really good solution.
?
73 de NA5RC
Re: MS apps under Ubuntu WINE

 

Paul,

I use Linux exclusively: a generic Ubuntu installation on my main workstation. I have used the native Linux Zoom client extensively, heavily, for work during the past several years -- without issue. I also used it for a CWOps class (with the same "native sound" tweak that people required on Windows boxes). I download the latest .deb straight from Zoom.

I use TSQL natively.

I use "qrq" for, I think, similar training as RufzXP.

And I've been using LibreOffice and its predecessors for more than 25 years now, including for work, graduate school, doctoral thesis, etc. It's solid and very capable. I just live with the fact that Microsoft doesn't want competitors to be open their documents with the formatting perfectly intact (and ask for a PDF if formatting matters).

73 de Todd W2TEF
Re: MS apps under Ubuntu WINE

 

¿ªÔÆÌåÓý

I would recommend MX Linux.

There's a really helpful Forum and many Hams using it.

It's also Debian-based (They also provide non-systemd and systemd options).

On 11/30/24 11:50, k4rfk via groups.io wrote:

I agree with Dave, G?WBX that if you are having difficulties with Ubuntu then you should try LinuxMint, Cinnamon edition.? It is very friendly for those just getting into Linux.? Also for contesting you should look into NOT1MM, Linux Native app for contest logging.? Its "not" N1MM but it is still being developed and is doing a good job of duplicating N1MM for Linux, just not fully there yet.?
??? Also for contesting try to use TR4W and SD (super duper) both of which run very well under WINE in Linux and support almost all the contests out there.?

Bob, K4RFK

Sent with secure email.

Re: This is new

 

?
?
Configure > Xcvr > Rig IC-7100
?
Look for something like this:
?
/dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_IC-7100_22001383_A-if00-port0
?
Baud 19200 (Set IC-7100 to match in Set > Connections > CI-V)
Re: MS apps under Ubuntu WINE

 

I agree with Dave, G?WBX that if you are having difficulties with Ubuntu then you should try LinuxMint, Cinnamon edition.? It is very friendly for those just getting into Linux.? Also for contesting you should look into NOT1MM, Linux Native app for contest logging.? Its "not" N1MM but it is still being developed and is doing a good job of duplicating N1MM for Linux, just not fully there yet.?
??? Also for contesting try to use TR4W and SD (super duper) both of which run very well under WINE in Linux and support almost all the contests out there.?

Bob, K4RFK

Sent with secure email.

Re: flrig 2.0.05.85 posted

 

¿ªÔÆÌåÓý

Philip, when you open a notarized version of an app, you¡¯ll get:


Click on yes and it should open without further action.

Notarized version of Fllog-1.2.8 is here:


Let me know if you need anything else.

On Nov 30, 2024, at 5:04?AM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:

Gary,?

As a test, I just now downloaded Fllog-1.2.8 VN.dmg from the W1HKJ site. At first I could not get it to open (could not be checked for malware, etc) , but then I went into Privacy and Security and said open anyway and then it worked.(So this work around is still good for now anyway.)

I had updated my MacOS to 15.1 the other day and all the programs that I had running on the old MacOS continued to work just fine. (Flrig, WSJT-X, etc) This test shows me that the reason they continued to work was that they had already been installed and opened in the previous MacOS. (They were non signed and notorized versions)

I did download the signed and notarized versions of the software that you had sent. I have not installed/opened them yet. I didn't want to rock the boat. but have them in a folder for backup at the moment.?

FYI, Antarctica is on the air. I made an FT8 contact with callsign Ri1ANE at Progress Base -69.396667 Latitude and 76.373333 Longitude. It was on 20m at 02:21 GMT on November 8th. Anyway, I thought that was cool. From a google search -?Progress is a Russian research station in Antarctica.?It is located at the Larsemann Hills antarctic oasis on the shore of Prydz Bay.

Thanks again,
Cheers,
Philip


On Nov 26, 2024, at 2:18?PM, Philip, AC4O via??<ac4o.philip@...> wrote:

Gary,

Thanks for the notarized updated Flrig.

FYI, I did decide to bite the bullet and update my MacOS to 15.1 from 14.

It turns out that all my apps Flrig, Fldigi, JS8call, WSJT-X, GridTracker2, and RUMlogNG continue to work.

This may be due to the fact that they had already been up and running on my previous MacOS, I am not sure.

I have not tried to download additional apps and install them yet, but wanted to mention the old ones are still working.

Thanks and 73s
Philip?
AC4O



On Nov 25, 2024, at 6:16?PM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:

Flirig-2.0.05.85 notarized for MacOS 15 is here:


On Nov 25, 2024, at 10:09?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:

at?

See readme.txt for most recent changes.

73, David
W1HKJ





Re: flrig 2.0.05.85 posted

 

¿ªÔÆÌåÓý

Gary,?

As a test, I just now downloaded Fllog-1.2.8 VN.dmg from the W1HKJ site. At first I could not get it to open (could not be checked for malware, etc) , but then I went into Privacy and Security and said open anyway and then it worked.(So this work around is still good for now anyway.)

I had updated my MacOS to 15.1 the other day and all the programs that I had running on the old MacOS continued to work just fine. (Flrig, WSJT-X, etc) This test shows me that the reason they continued to work was that they had already been installed and opened in the previous MacOS. (They were non signed and notorized versions)

I did download the signed and notarized versions of the software that you had sent. I have not installed/opened them yet. I didn't want to rock the boat. but have them in a folder for backup at the moment.?

FYI, Antarctica is on the air. I made an FT8 contact with callsign Ri1ANE at Progress Base -69.396667 Latitude and 76.373333 Longitude. It was on 20m at 02:21 GMT on November 8th. Anyway, I thought that was cool. From a google search -?Progress is a Russian research station in Antarctica.?It is located at the Larsemann Hills antarctic oasis on the shore of Prydz Bay.

Thanks again,
Cheers,
Philip


On Nov 26, 2024, at 2:18?PM, Philip, AC4O via groups.io <ac4o.philip@...> wrote:

Gary,

Thanks for the notarized updated Flrig.

FYI, I did decide to bite the bullet and update my MacOS to 15.1 from 14.

It turns out that all my apps Flrig, Fldigi, JS8call, WSJT-X, GridTracker2, and RUMlogNG continue to work.

This may be due to the fact that they had already been up and running on my previous MacOS, I am not sure.

I have not tried to download additional apps and install them yet, but wanted to mention the old ones are still working.

Thanks and 73s
Philip?
AC4O



On Nov 25, 2024, at 6:16?PM, Gary Rogers, KO3F via groups.io <cgaryrogers190@...> wrote:

Flirig-2.0.05.85 notarized for MacOS 15 is here:


On Nov 25, 2024, at 10:09?AM, Dave, W1HKJ via groups.io <w1hkj@...> wrote:

at?

See readme.txt for most recent changes.

73, David
W1HKJ




Re: This is new

 

¿ªÔÆÌåÓý

To access the serial port? you must be a member of the dialout group.

dave@tk7:~$ groups
dave adm dialout fax cdrom floppy tape sudo audio dip video plugdev lpadmin netdev scanner sambashare

You can assign yourself to the dialout group using the Cinnamon user interface, or from a command line terminal on Ubuntu:

Add yourself to the dialout group

??? Open Terminal.
??? Enter the following command, replacing <username> with the name of your account. sudo usermod -a -G dialout <username>
??? Restart your computer for the changes to take effect.

73, David, W1HKJ


On 11/29/24 16:40, Dan Pyle, KG7AFL via groups.io wrote:

So I got an alert from Microsoft that they are Stopping the support for all Windows 10 and prior.
As I have a few computers I? am now going to go full Linux and install different Flavors of Ubuntu.
On my main I went with Cinnamon Ubuntu. I have been leaning this way for a few years but just now decided.
So hear comes the learning of Linux and Cinnamon.
?
But for here I am getting all my win software switched over.
I am having troubles with getting FLdigi to work properly.
I don't know what USB Port to use to connect to my radio.
I see the Silicon Labs A & B.
I have another on for an Internet Labs.
I have clicked on both but nothing works.
Radio i have is the Icom IC-7100.
?
Thanks up front for any help.
?
Dan
KG7AFL
?

This is new

 

So I got an alert from Microsoft that they are Stopping the support for all Windows 10 and prior.
As I have a few computers I? am now going to go full Linux and install different Flavors of Ubuntu.
On my main I went with Cinnamon Ubuntu. I have been leaning this way for a few years but just now decided.
So hear comes the learning of Linux and Cinnamon.
?
But for here I am getting all my win software switched over.
I am having troubles with getting FLdigi to work properly.
I don't know what USB Port to use to connect to my radio.
I see the Silicon Labs A & B.
I have another on for an Internet Labs.
I have clicked on both but nothing works.
Radio i have is the Icom IC-7100.
?
Thanks up front for any help.
?
Dan
KG7AFL
?

Re: No S/SWR/Power Meter on Ten Tec 550 Pegasus

 

When I view the trace log, I see flrig sending a "get smeter" command every second, but have displayed S-meter on the radio. When I press the "Tune" button, I also see a "get power out", but no display on the meter.

621 - 640 of 53994