开云体育

Jindra, thanks a lot.? Your detailed approach is a try I will apply to, as soon as I can plan (I think a full day of work :-)).?? Crostini is the "internal" linux embedded in ChromeOS, installing

The Country (CTY) Files were updated on 13 February 2025: https://www.country-files.com/cty-3505-13-february-2025/ For installation instructions, start at:

Fixed it! When I setup WFVIEW, it specified using QT audio (default) and the default settings in their manual . Sine Fldigi does Port Audio, I set WFVIEW to Pot Audio and played with the settings

Roberto, I don't know what is Crostini, but I think I had a similar problem with that Dell 3180. When I unlocked developer mode I was unable to complete the procedure described at site

Hi Jindra sorry, you are far from the point:? Crostini does not see ANY USB device, also a memory stick is not loaded. the application cannot see any peripheral, so the radio model is only the next

By profile, I mean the 2nd user account. Nothing was copied between accounts. I did get audio eventually after a reboot and the original problem disappeared.. Now I am left with a motorboating

Hi, Bob, I missed your answer and found it only now. What you propose is an interesting idea. So far I had the impression that wine32 requires wine (64-bit base) to be installed. I will ask someone

Maybe using git would make this much easier? SourceForge is not a kind of source code repository made for collaboration, it is rather an advertising display. 73 Jindra ok4rm Dne so 8. 2. 2025 23:59

Hi John Just some thinking out loud. I can't speak for wfview. My first thought was that if the .fldigi profile/directory was simply copied, then there are some hard references in the config files

[email protected]> wrote: No, I hear it in the monitor but no power out. Thanks, Richard KF5OIM

One suggestion to troubleshoot this crash would be to use the 'strace' command on fldigi. This will help pinpoint where the failure is occurring. If you're launching fldigi from the terminal, you

I have an Asus I5 laptop that I? set a second account up on to use Fldigi and WFVIEW together. I have created the profile twice. The first profile has Fldigi on it as well as WFVIEW.? I was

Hi, Roberto, software packages from repositories are usually quite out of date. If you need to support CAT of newer or less popular model of trx, often it helps to build the software from source. 73

Richard, Is there power out in CW, keyed at the 991A ? David <vk4tux@...> wrote:

I avoided putting pictures in my original post but just to add some details... I've been on Fedora since version 12 and have been a packager for over 12 years so while I always try to accept the fact

On Tue, 11 Feb 2025 16:54:12 -0600 "Richard Shaw, KF5OIM via groups.io" <hobbes1069@...> wrote: It suggests that maybe an audio switch or amplitude setting for the Tx/Data modulation

Chances are, you are sending audio to the wrong USB speaker port. This is digital and we are sending SSB. If the radio isn't getting audio input, then you get zero power out - that is the nature of

Ok, I'm hoping something is not wrong with the radio but that is looking less and less likely. I have a Yaesu FT-991a that has been working FB for a few years. The other day I sat down at the shack

I have an sBitx v3 that has essentially not modified, other that a dist-upgrade (It runs some Raspberry pi version of Debian). The full power is 25 W, and when I set the PA drive to 63%, I get 10 W

Tim, maybe I am not understanding the issue here. The very first thing you need to do is to find an RTTY signal and make it visible in your fldigi waterfall / passband. And you should be hearing it