开云体育

The Country (CTY) Files were updated on 28 November 2024: https://www.country-files.com/cty-3438-28-november-2024/ For installation instructions, start at:

Fldigi-4.2.06.10 notarized for MacOS 15 is here: https://www.dropbox.com/scl/fi/i32zb9octfe1hftxg8i8a/fldigi-4.2.06.10.zip?rlkey=0949dzyuieqo23wk29oh9yxqg&dl=0? fldigi-4.2.06.10.zip dropbox.com

Many Thanks Joe (K0OG) Another of those "Hidden in plain sight" settings! If I put 500 in the start of TX delay, it works fine, but makes the "sticky PTT" issue worse when going back to RX! It's

fldigi-4.2.06.10 posted at http://www.w1hkj.com/alpha/fldigi/ * fldigi-4.2.06.10.tar.gz <http://www.w1hkj.com/alpha/fldigi/fldigi-4.2.06.10.tar.gz> * fldigi-4.2.06.10_LI.dmg

GE. Looking for help with linux based QDMR code plug editor for DMR radio. It will read but not write to radio. Tnx and 73, Ed W8EO Jupiter FL

Gary, Thanks for the notarized updated Flrig. FYI, I did decide to bite the bullet and update my MacOS to 15.1 from 14. It turns out that all my apps Flrig, Fldigi, JS8call, WSJT-X, GridTracker2,

Understood, James.? I'm saying that if you read what is already in the channel and put that into a Memory Write command (button) with flrig, the radio will switch to that memory location and switch

The only thing I want to achieve is to change memory channels that are programmed in the radio. But sometimes, I am in VFO mode for whatever reason and if I want to get back to being able to change my

The radio switches to Memory mode and the designated channel upon a write (MW).? You could set command buttons with memory writes by copying the results from a Memory Read (MR) to a command (button),

Dave, That delay setting is in the PTT settings: 73, -Joe- K0OG

Flrig Built just fine on LMDE 6. No trace of a "sticky" PTT issue running Flrig on it's own.? (I spent a minute clicking the PTT button and no stickyness...) But..?? I have had one occurrence

There is a Windows Program called "Win4YaesuSuite" and with this program you can control V/M on the 991. Which leads to my assumption that such command must exist.

So, I got the Channel Up/Down working, but I have to place the 991 into Memory mode, by hand. I've looked through the CAT control commands and for the life of me, I cannot find the command to toggle

Wow. Nice research! No one knows why the line setting was removed or why one wants to remove an already working feature. I agree that it should not hurt to bring it back and allow us hams to play

Hello! Meanwhile, I did some research... First I found this: https://www.sstv-handbook.com/download/sstv_11.pdf in which the WEFAX settings are described as any kind of combination between 288/576

Flirig-2.0.05.85 notarized for MacOS 15 is here: https://www.dropbox.com/scl/fi/c1s2jodc9579pkxtd9mzy/flrig-2.0.05.85.zip?rlkey=ou7l01o6etkzxr5skhqo39rqj&dl=0? flrig-2.0.05.85.zip dropbox.com

at http://www.w1hkj.com/alpha/flrig/ * flrig-2.0.05.85.tar.gz <http://www.w1hkj.com/alpha/flrig/flrig-2.0.05.85.tar.gz> * flrig-2.0.05.85_LI.dmg

Seems the general radio setup image fell off the list mail.. Hear is a repeat... Hopefully this gets through. 73. Dave G0WBX.

Thank you, I will record is as soon as I can receive it because is quite a difficult station to receive. I will also try using some online sdr receivers... 73 de IW9HGS [email protected]>

Can you please create a sound file recording of the KYODO NEWS wefax broadcast.? Send it direct to w1hkj@... Thank you. David