Using a Kenwood TS-870s and Flrig (also the .75 alpha)
I find that the BW filter LF cutoff setting is always reset to 300Hz whenever the high cutoff setting is changed.
It's not the rig, you can manually at the rig's front panel flip between LSB/USB without the filters being reset.
Also one can manually change either the High Cut, or Low Cut setting without affecting the other.
The LF setting is also replaced with the HF setting, after changing the LF setting in the Flrig UI.
Not noticed any unwanted working frequency changes, but the above is when just using Flrig ONLY (without Fldigi running & linked to it.)
I've not dug into that yet, but there are one or two other "odd" anomalies I've noticed.? I'll have to start gathering info as I find them.
As I had a part to play in that rig backend, I'll dig deeper as time permits. But I've a lot of other non radio stuff "on my plate" at present.
73
Dave G0WBX.
--
Created on and sent from a Unix like PC running and using open source software:
