开云体育

Wher can I purchase the above cables. ?They do not seen to be available

Keep in mind that newer LDG tuners now have the radio tune feature disabled. My AT1000 came in that way, my AT600 still has the feature. When I spoke to LDG over the phone, he said people were running

No SWR to deal with? No, not impossible. But maybe not practical. I think of it in terms of what I tell people about QRP. Cute little RADIOS connected to cute little ANTENNAS don’t log many cute

Good points Ron, just an add: If you are going through an amplifier, you probably want to leave the tuner in semi automatic mode and monitor SWR more closely. You would not want that tuner to auto

Thank you Susan for your reply. This clears up some questions I had. 73 Joe Get BlueMail for Android

The "PC" port on the back of the Z-817H passes through serial commands received on the "Radio" port, to a linear amplifier capable of responding to a subset of the Yaesu CAT serial commands, such as

I've read the manual about the computer port but I'm still not clear on how to use this feature. I have an FT-818 and a Z-817. Can anyone clarify its use and recommend appropriate software? 73 Joe Get

Dennis, Not sure if this helps, I made a YouTube video covering the Yaesu FT897 no cat/linear control for FC30 or LDG AT897 ATU, CAT socket pin missing the 13.8v due too on board fuse F1001 blown,

I'm sorry but had you read & understood the first message in this thread, as well as the repeated, an redundant, conditions in subsequent messages you could have saved yourself a great deal of time

Dennis, I? am a bit annoyed. I spent time looking at manuals and schematic diagrams to provide you an answer. I asked: * Does the CAT port work to a PC? * Does the CAT port still work if the PC

Thanks for the well-written details, Geert. And, since we're talking FT-897s, the stock Yaesu FNB-78 NiMH 4.5 AH batteries are still available from Gigaparts at $144.95 for the pair. 73, Kent K9ZTV

The AT897 and the AT897plus work in a different way. The AT897 needs three connections: RF antenna to the 897, the CAT connector (which is only used to get power for the tuner from the radio), and an

I would decrease power on FT8 to about 70-80 watts unless you have a more substantial 9:1 unun. Check SWR frequently. That way you might preserve the radio finals longer too. Have fun with FT8! 73 de

Thanks Ron. Having it connected to a 706MK2G spoiled me! ? ? ? ? ? ? ? ? ? ?Mike KK2DOG? ? ? ? ? ? ? ? ? ?Watertown, NY??? ? ? ? ? ? ? ? ? ? ? ? FN24

Although it is good to have the LDG tuner work from a rig with a tune command, but the LDG tuners can operate in automatic where when they see RF and SWR above 1.5:1 they automatically tune.? So only

Does anyone know if these two are compatible and if so, what interface cable do I need?

From the AT-897 Plus manual: "The 8-pin CAT interface connector is Kycon Connector part number KMDAX-8P, available from http://www.mouser.com/ as Mouser part number 806-KMDAX-8P. Pinning for this

I used two different cables, and as I think I noted, the YT-100 works perfectly with the 897, and the AT-897 works perfectly with the FT-857. The AT-397 just will not work with the FT-897. Cables are

One issue with LDG tuners and Yaesu rigs is on some of the tuners the control cable switches the tip and inter ring connections.? They cross at the connector.? tip of one goes to inter ring of the

Dennis ... If MENU 19 in the FT-897D is set to 4800 bps, and MENU 20 is set to CAT (not TUNER), then the problem probably lies with the cable. Are you using the original DIN-8 cable supplied by LDG