开云体育

Thank you Chuck your absolutely correct, thanks for keeping it honest. 73' Mike

Michael: Keep in mind that people don't often just sign up to this mail group and submit a post saying that it's working fine today, but if there's a problem they would be more likely to join the

I joined this forum to assist me with making a decision about if I should purchase the LA-1K. Would it be correct of me to be a little apprehensive due to the number of comments regarding the trouble

My week old amp went back to the white screen. Could not get it to boot up. Sent it back to Palstar received it back Saturday. Had a small metal particle shorting 2 pins. Works fine now and fast

Mine does same thing.

Mine does the dame. Minor pain in the butt. Great Amplifier. Get Outlook for Android<https://aka.ms/ghei36> ________________________________ Sent: Friday, July 17, 2020 10:21:53 PM To:

all my equipment are well grounded and I still get the occasional WSOD - white screen of death. The only method that works for me is to power up LA-1K at first and then all the other radios and Tuner!

I have no idea why, but if I am using ANT2, and switch bands, and switch antennas to ANT1, when I go to transmit, the LA-1K goes back to ANT2.? Then I can switch it again to ANT1, and it stays

Everything was grounded. Now the amp and transceiver are connected together. Might be a fluke but it's working fine now.

Isn’t all your equipment supposed to be grounded together on a ground buss? Or was it already that way, and you needed to add a second ground wire directly to the radio? Sent: Friday, July 17,

My week old LA-1k started just booting up to a white screen. Tried plugging a cable into the Yaesu jack like suggested on here. It did nothing.? Ended up dissconnecting the keying line. It boots up

I wish we had a small box like the HF-AUTO-R to control the amp features... as there is no official support on this and the TRX manager software is rather difficult, *after the warranty period is

Thanks.? First firmware update for me.? Didnt want to brick it.

Yes - it is the .txt file in the zip folder. I just installed on Tuesday this week.

Yes, it's the txt file always had been with Palstar LA-1k

Is the firmware the text file in the zip?? Normally firmware is labeled .bin

Hi Steve - there was a customer that asked a similar question, the answer from one of the engineers might help you or others so I'm posting it here: ALC is NOT required and should ONLY be used on

Tnxs for the info VU2TG. Ordered it thru HRO. 73s Tim N4HOZ

Interesting... So it could be the LA-1K was not reliably detecting the frequency? That might cause a problem also. Chuck - N8DNX

Bill: I am using a Polyphaser. They work fine if they are selected for the proper frequency and power range. There also needs to be consideration for the amount of SWR that is expected on the line