开云体育

So, it's not a power switch failure but just the bulb inside.? I wonder if it's incandescent or LED?? I received my amp directly from Palstar in September of 2022 and have had zero issues with it.

I have s/w like that and acts like that on my Astron 35m. It has done that for 30 years plus. PS still works fine. Just like your amp does. Steve W7CM ________________________________ Sent: Monday,

Hello Everyone, Quick update:? Mr. Mark Ward of Palstar has informed me earlier today, by email, Palstar discovered all of their power switches, obtained from a *new* supplier, have the same fault

Mine is a 2020 Ser. 34924 and has NO switch.. ...

The 9pin connector interface to an Icom 7610. Do I need this radio control cable interface cable? I'm already using the SEND /ALC from the 7610. And where does it connect to on the 7610 rear if

Kent, Let's look at it from the power switch manufacturer's perspective.. the power switch currently installed in my LA-1K will be declared *defective* at final test for failing to fully meet the

Ray ... What you say is true. What I said is also true. I wasn't questioning your assessment, I was narrowing the problem. When I ordered an HF-AUTO several years ago the same (presumably) kind of

Points well taken, Steve. 73, Ray KJ5MI

So, you don't blow out the fans in your computer or your amps or radios. Do you brush your teeth? There are many things that are just common sense. Perhaps I overthink thinks because I was a repair

Hey Kent, A fully serviceable power switch assembly so installed in the LA-1K shall include an indicator light that stays on the entire time the power switch assembly remains in the powered-on

To be accurate, the power switch itself has not failed; it's the light inside the power switch which has failed. The amp itself is still operating after the light goes out. 73, Kent K9ZTV

The current LA-1K Technical Manual http://www.palstar.com/en/product-manuals/manual_la-1k.pdf as provided on the Palstar website says nothing about the need for any periodic preventive maintenance

We live in farm country and it makes less things to take apart and blow out. Plus if you own a LA-1K you know the fans are not silent. Steve W7CM ________________________________ Sent: Saturday,

Great, it looks like KJ5MI ( "tuneupmagic (null)" )? got it about right about 10 posts ago!?? Happy you got it figured out. 73,? Ron?? WA2EIO

Lol.. I take "those fans" you mentioned above are the ones installed in the Palstar products. What is/are the reason(s) you don't want to run those fans all the time?? Are the fans too noisy or you

Aha! I’m using Antenna 2 . I know it was passive with my 7600 but I changed to ant 2 with the 7610. This explains it Thank you! 73 Chris K2HVE

I operate my Yaesu FTDX101D (internal ATU disengaged) as an exciter for my LA-1K (both on and off) into antennas with acceptable SWR at each operating frequency; all without the use of any external

I run my FTDX 101 with the HF Auto and LA 1K with the Palstars turned off most of the time. I also operate them independently with one or the other turn on or off. They are here to use as needed not

I bought mine within the last 6 months and it does not need to be powered on to use my radio. ?Get BlueMail for Android ?

Great reminder Kent - thanks! Paul NO0T wrote: