Steve ...
Which cable are you referring to ... ALC, PTT, RS232 Band Control (Kenwood), or Radio Interface (Icom/Yaesu)?
73,
Kent ?K9ZTV
toggle quoted message
Show quoted text
On Jul 10, 2020, at 2:45 PM, Steve Shep < shepsvettes@...> wrote: Does the cable just do band selection and keying? ? ? I do not use it.
I do use the Band-Data DE-9 jack, however, and Direct Keying.
73,
Kent? K9ZTV
On 7/10/2020 12:15 PM, Hobart Poyser wrote: ? Who all uses ALC? About what setting do you have?
?
|
Two different cables. Serial RS232 (DB9) for band data and an RCA Phono input for key input.
From: "Steve Shep" <shepsvettes@...>
To: "la1k" <[email protected]>
Sent: Friday, July 10, 2020 2:45:23 PM
Subject: Re: [la1k] ALC
Does the cable just do band selection and keying? ? ? I do not use it.
I do use the Band-Data DE-9 jack, however, and Direct Keying.
73,
Kent? K9ZTV
On 7/10/2020 12:15 PM, Hobart Poyser wrote: ? Who all uses ALC? About what setting do you have?
?
|
|
|
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Steve Shep Sent: Friday, July 10, 2020 2:16 PM To: [email protected]Subject: Re: [la1k] Firmware ? How old is the amp? ? ? ? Low output on 160. Worked but only at about ? power. ? They found some failed parts and they have came up with some circuit improvements for 160 so they did those at same time. ? All other bands were OK. ? ? Hi, what was wrong with your amp? That you had to send it in for repair.
best regards
Stewart
ZL4DC
|
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of Rich McCabe Sent: Friday, July 10, 2020 2:15 PM To: [email protected]Subject: Re: [la1k] Firmware ? Low output on 160. Worked but only at about ? power. ? They found some failed parts and they have came up with some circuit improvements for 160 so they did those at same time. ? All other bands were OK. ? ? Hi, what was wrong with your amp? That you had to send it in for repair.
best regards
Stewart
ZL4DC
|
Low output on 160. Worked but only at about ? power. ? They found some failed parts and they have came up with some circuit improvements for 160 so they did those at same time. ? All other bands were OK. ?
toggle quoted message
Show quoted text
|
Hi, what was wrong with your amp? That you had to send it in for repair.
best regards
Stewart
ZL4DC
|
I do not use it.
I do use the Band-Data DE-9 jack, however, and Direct Keying.
73,
Kent? K9ZTV
On 7/10/2020 12:15 PM, Hobart Poyser
wrote:
One to one and a half,
Mike KR9G
Who
all uses ALC? About what setting do you have?
|
Yes, recently released but I think there may be
another one coming shortly which is why the website has not been
updated.
73,
Kent? K9ZTV
On 7/10/2020 12:44 PM, Steve Shep
wrote:
Just got my new LA-1k It has 1.07b firmware. Is this a new
version?
|
I bought mine two months ago, and it has 1.05 on it.??
I don't update firmware unless it fixes something I have an issue with.
No idea why they cant post the update changelog on the website in a timely manner, But Marantz and Denon have the same problem.? Have to email their tech support to find out what changed.
|
|
|
They emailed me an update when I asked. It took weeks for that update to show on the web site. It is obviously is even further behind now. All of their documentation is rather terse as well.
--
73,
Jerry
|
Hard to say but likely. Palstar does not keep their site up to date. ? I sent my amp in for repair and it came back with 1.06 on it.? So yours is newer. ? However, the newest available on their site is 1.05 ? ? Rich ? ? ?
toggle quoted message
Show quoted text
|
Just got my new LA-1k It has 1.07b firmware. Is this a new version?
|
|
|
Who all uses ALC? About what setting do you have?
|
Did my 220v wiring. I used 10-3 wire so it should be good.
|
OK that is one breaker ? ? ? ?
toggle quoted message
Show quoted text
From: [email protected] < [email protected]> On Behalf Of JERRY Sent: Saturday, July 4, 2020 3:06 PM To: [email protected]Subject: Re: [la1k] 6 meter output ? They are bared together, that’s all I know
On Jul 4, 2020, at 13:04, Rich McCabe via <r.mccabe@...> wrote:
? Not one 220 breaker?? I do not think two single breakers will pass code anywhere in the US. ? ? ? ? He had one on each wire, not sure why all I know he was a commercial electrician. I obviously was not lol
--
73,
Jerry
--
73,
Jerry
|
They are bared together, that’s all I know
?
On Jul 4, 2020, at 13:04, Rich McCabe via groups.io <r.mccabe@...> wrote:
Not one 220 breaker?? I do not think two single breakers will pass code anywhere in the US.
?
?
?
?
He had one on each wire, not sure why all I know he was a commercial electrician. I obviously was not lol
--
73,
Jerry
--
73,
Jerry
|
|
|
Stewart - ZL4DC
Jerry Raia