开云体育

Rick, I have had the LA-1K for 5 months. I'll preface this by saying I think it's a great piece of gear, but it didn't start out that way. My first ten minutes of use went well, but then it suddenly

Thanks to those who offered comments. Yes, the Bulgaria location for service is less than appealing, however I note that overall, Acom amps seem to get excellent reviews. Apparently teething issues

I like the Palstar LA-1K for all reasons above but also because TRX-MANAGER allows me to run it remote with nice display. Also runs really cool easy 1KW out in 6 meters. Not degraded at higher

P.S.... Besides the information on the Acom/Palstar amplifier comparison, you have the tuners to think about. Palstar HF-Auto tuner has achieved legendary status.? Thousands in the field and pretty

Hello Rick, ?? We'll, things might be better for the 1200S now, but last year they were having big problems delivering with four-plus month waiting, and a fair number having go back to Latvia for

Getting ready to do some upgrades in the shack and looking for a solid state amp (and tuner) in the 1000 watt class. The two most interesting so far are the LA-1k (with HF Auto tuner) and Acom 1200S

Good to hear. Thanks, Bob NN5D

Just got an email from Mark at Palstar. 1.04B is now out. Will be on the web site soon.? -- *73,* *Jerry* *WX1FLY* ( http://www.qrz.com/db/wx1fly )

OKay, I see.? I had the older unit S/N: 28K range but there was some sort of band data cable problem for Yaesu radio.? I understand there was some confirmed issue with the early S/N about the

Webmaster is Paul and Eva’s son ? *From:* [email protected] <[email protected]> *On Behalf Of *JERRY *Sent:* Wednesday, April 10, 2019 7:04 PM *To:* [email protected] *Subject:* Re: [la1k] firmware

I found the email conversation I was having with Mark, here is what he wrote about 1.04A: "V1.04 moves the band switching frequency between 40M, and 20M to better optimize filter switching around 9.5

Jerry, Same here, did sent the email asking about it but have not heard anything back yet.? The web site only have 1.03H for download.? I guess the web master and software developer are out of

In an email exchange with Mark at Palstar about another issue he mentioned that 1.04A is the new version being shipped with all amps now. He didn't know why it wasn't on the web site yet. This was

Just got new LA-1K,? boot screen is showing version 1.04A What is this all about?? Cannot find any info on Palstar site.? Anyone have this firmware version or info? 73, W3KIT

Love the amp…use it all the time on SSB but was wondering if I use it on FlDigi etc. what do I need to know ? Thanks W4OZ Dennis

Hi Dennis, No Mark didn't mention it but it is interesting especially because the amp doesn't use ALC for CW so this spike you mention from the radio makes sense. This could also explain why it only

Hi Jerry, I'm sure Mark has mentioned this to you, but are you sure the exciter isn't spiking it's drive power? The ALC circuits in many radios have enough delay in them that they'll spike on

My LA-1K is connected to an HF-AUTO tuner and an ICOM 7610. I have the data cable connected from the 7610 to the amplifier. When the amplifier is in "Direct Mode" (using the data cable for PTT and

Thanks for that, I am surprised too the cable isn't just available 73, Jerry WX1FLY ( http://www.qrz.com/db/wx1fly )

I made the band switch cable as well but never have the need to use it.? Auto RF was pretty quick for what I was using the linear for.? I even try out using just the PTT cable on some Digital mode,