开云体育

ctrl + shift + ? for shortcuts
© 2025 开云体育

Re: LA-1K Trips to Standby in SSB mode only


 

开云体育

I had similar problems two years ago talked with Mark at Palstar he had me put it into a dummy load everything worked normal the next day I replace my alpha DX plus antenna and today I use a hex beam for the higher frequencies and I use a double bazooka for 40 and 80. If you have a dummy load I suggest you try it out which will validate it’s from the coacts or the antenna

Barry ?


On Aug 15, 2022, at 4:19 PM, Barry <barplo@...> wrote:

?

I have had similar issues. Like I said, look at all your other connections and antenna. GL

VE6UM

?

From: [email protected] <[email protected]> On Behalf Of Thomas NE7X
Sent: August 15, 2022 2:06 PM
To: [email protected]
Subject: Re: [la1k] LA-1K Trips to Standby in SSB mode only

?

SWR is 1:1., using Palstar HF-auto tuner.
Only noticed it on 20 meters.
Does not trip to standby on other modes, on SSB
I replaced jumper coax between IC-7610, LA-1K and HF-auto
It's on voice peaks is when the amp trips out.
If I cut the mic audio back, it does not happen, however the amp puts out lower RF power.
I tried adjusting ALC on both the IC-7610 and LA-1K, there is no noticeable difference no matter what ALC setting I use.
NE7X...

Join [email protected] to automatically receive all group messages.