Steve,
Are you using the CT-118 with the ftdx-101 or the CT-178 which is the cable listed for the 101D/MP.
Ron?
WD8T
Sent from Proton Mail mobile
toggle quoted message
Show quoted text
-------- Original Message --------
On Jan 4, 2023, 6:16 PM, Steve Snyder < w7cm@...> wrote:
I use one with my 101. Works good. You have to go into the menu and tell
the amp that is what you are doing. You can also do away with the Keying line.
Steve
I have a FTDX10 with the LA-1K.? I bought the cable needed off of ebay ->?
The cable goes to my MFJ998 ATU, and the output goes to the amplifier.? I have not tried to go directly from the radio to the amp with this cable. However, I sent an email to Palstar and they seemed to think this cable would work going directly from the
FTDX10 to the LA-1k.
Thanks,
David
On 1/4/2023 3:27 PM, Joe Loverti wrote:
Does anyone have experience using a Yaesu FTDX10 to drive the LA-1K? Yaesu suggests using their CT-118 band data cable for their Yaesu amp. Would it also work for the LA-1K?
Joe Loverti
WW8X
Ron Emerson