Joe ...
According to the FTDX10 manual, you want an SCU-28 cable
for connection to the LA-1K (not SCU-18).
Snip off the other end, and wire it to a break-out board:
(spring terminals and thumb screws)
73,
Kent
K9ZTV
On 1/7/2023 2:01 PM, Joe Loverti WW8X
wrote:
I plan on doing something similar with my FTDX10 to the LA-1K. The
FTDX10 uses a 10-pin mini din, so I ordered a Yaesu SCU-18 cable
to connect to a 9-pin solder-less terminal connector. I just have
to make sure I get the correct wire to the correct pin. I'm using
the chart in the LA-1K manual as a guide.
Joe - WW8X
