Import Spice schematic
开云体育Can version 8.02 import a Spice schematic,
specifically an LTspice schematic? --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育Thank you. Would you please tell me how you
did that, because I can't find? a way that works. On 2024-05-11 22:34, Peter Ayearst
wrote:
I did? import a LTspice schematic but not sure if it was v8.02 or not. It seemed to work ok except the connection dots did not show up in the schematic.? ?KiCad did know there was a connection.? Simple schematic not much of an issue but anything else would be troublesome. --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育No need to reply: I found out how to do it. On 2024-05-11 22:56, John Woodgate
wrote:
--
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育Yes, I did, but the connections and crossings
seem to be preserved. Now I wish that there was a way to
assigning the same footprint to all the resistors in one
operation, instead of 61 separate operations. It's a smaller
issue with capacitors, because they don't have all the same
footprint. On 2024-05-12 21:04, Peter Ayearst
wrote:
John, --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育Thanks, but I do not know what 'table layout view' is. How do I find it?? I notice that the BOM generator is buggy. It
doesn't cope correctly with several components having the same
value and footprint. If it's not easy to put, say C5, C6, C7 all
in column 1, it would be better to use three rows than spread
the data across seven columns, with wrong content in several of
them. On 2024-05-12 22:08, Andy wrote:n
You should be able to do that on the table layout view Just cut and past as required in the footprint field. Andy On Sun, 12 May 2024 21:40:31 +0100 "John Woodgate" <jmw@...> wrote:Yes, I did, but the connections and crossings seem to be preserved. Now I wish that there was a way to assigning the same footprint to all the resistors in one operation, instead of 61 separate operations. It's a smaller issue with capacitors, because they don't have all the same footprint. On 2024-05-12 21:04, Peter Ayearst wrote:John, Did you find the same thing as I fid?? Connection dots did not import jnto KiCad? Peter-- Signature OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying -- This email has been checked for viruses by AVG antivirus software. --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育Hey, the dots have suddenly appeared. But
also, some spurious short wires have appeared, coming from dots
and going nowhere. The imported symbols are smaller than the
native KiCad symbols and the capacitors don't have thick plates. On 2024-05-12 21:40, John Woodgate
wrote:
--
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
开云体育Sorry to be persistent, Andy, but I am using version 8.0.2 and I can't find that icon on the Schematic toolbar. It goes Save, Schematic set-up, Page settings, Print, Plot, Paste... I think that the BOM formatting may be
editable in 8.0.2, but I will look at that later. On 2024-05-13 10:22, Andy wrote:
Top toobar at theb left hand end, looks like a spreadsheet icon Tooltip is "Bulk edit fields of all symbols in schematic" As for the BOM, well that's why BOM / stock control systems cost thousands. That said, it should cope with something that simple, and give you 3x10pf silver mica or some such. BOM is not something I use that much, I've usually got all the data already assembled in a spreadsheet. Andy On Sun, 12 May 2024 22:46:54 +0100 "John Woodgate" <jmw@...> wrote:Thanks, but I do not know what 'table layout view' is. How do I find it? I notice that the BOM generator is buggy. It doesn't cope correctly with several components having the same value and footprint. If it's not easy to put, say C5, C6, C7 all in column 1, it would be better to use three rows than spread the data across seven columns, with wrong content in several of them. On 2024-05-12 22:08, Andy wrote:nYou should be able to do that on the table layout view Just cut and past as required in the footprint field. Andy On Sun, 12 May 2024 21:40:31 +0100 "John Woodgate"<jmw@...> wrote:Yes, I did, but the connections and crossings seem to be preserved. Now I wish that there was a way to assigning the same footprint to all the resistors in one operation, instead of 61 separate operations. It's a smaller issue with capacitors, because they don't have all the same footprint. On 2024-05-12 21:04, Peter Ayearst wrote: --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
|
I'm still using V 6 as I've been out of action with a long stay in
hospital so I've not upgraded for quite a while. The basic problem is that I don't know my left from right :-) 4th Icon from the right on my pretty much default setup. I've sent this directly to you as well just in case the attachment does not work on the list Andy On Mon, 13 May 2024 11:30:36 +0100 "John Woodgate" <jmw@...> wrote: Sorry to be persistent, Andy, but I am using version 8.0.2 and I can't |
开云体育Thanks very much, Andy. That icon is called
'Edit symbol fields' in version 8.0.2, which is a correct name
but misleading. It is in fact a BOM, formatted the way I
proposed in my bleat about the official one. On 2024-05-13 21:18, Andy Eskelson
wrote:
I'm still using V 6 as I've been out of action with a long stay in hospital so I've not upgraded for quite a while. The basic problem is that I don't know my left from right :-) 4th Icon from the right on my pretty much default setup. I've sent this directly to you as well just in case the attachment does not work on the list Andy On Mon, 13 May 2024 11:30:36 +0100 "John Woodgate" <jmw@...> wrote:Sorry to be persistent, Andy, but I am using version 8.0.2 and I can't find that icon on the Schematic toolbar. It goes Save, Schematic set-up, Page settings, Print, Plot, Paste... I think that the BOM formatting may be editable in 8.0.2, but I will look at that later. On 2024-05-13 10:22, Andy wrote:Top toobar at theb left hand end, looks like a spreadsheet icon Tooltip is "Bulk edit fields of all symbols in schematic" As for the BOM, well that's why BOM / stock control systems cost thousands. That said, it should cope with something that simple, and give you 3x10pf silver mica or some such. BOM is not something I use that much, I've usually got all the data already assembled in a spreadsheet. Andy On Sun, 12 May 2024 22:46:54 +0100 "John Woodgate"<jmw@...> wrote:Thanks, but I do not know what 'table layout view' is. How do I find it? I notice that the BOM generator is buggy. It doesn't cope correctly with several components having the same value and footprint. If it's not easy to put, say C5, C6, C7 all in column 1, it would be better to use three rows than spread the data across seven columns, with wrong content in several of them. On 2024-05-12 22:08, Andy wrote:nYou should be able to do that on the table layout view Just cut and past as required in the footprint field. Andy On Sun, 12 May 2024 21:40:31 +0100 "John Woodgate"<jmw@...> wrote:Yes, I did, but the connections and crossings seem to be preserved. Now I wish that there was a way to assigning the same footprint to all the resistors in one operation, instead of 61 separate operations. It's a smaller issue with capacitors, because they don't have all the same footprint. On 2024-05-12 21:04, Peter Ayearst wrote: --
OOO - Own Opinions Only Best wishes John Woodgate, Rayleigh, Essex UK Keep trying |
John Woodgate
Peter Ayearst
