Top toobar at theb left hand end, looks like a spreadsheet icon
Tooltip is "Bulk edit fields of all symbols in schematic"
As for the BOM, well that's why BOM / stock control systems cost
thousands.
That said, it should cope with something that simple, and give you
3x10pf silver mica or some such.
BOM is not something I use that much, I've usually got all the data
already assembled in a spreadsheet.
Andy
On Sun, 12 May 2024 22:46:54 +0100
"John Woodgate" <jmw@...> wrote:
Thanks, but I do not know what 'table layout view' is. How do I find it?
I notice that the BOM generator is buggy. It doesn't cope correctly with
several components having the same value and footprint. If it's not easy
to put, say C5, C6, C7 all in column 1, it would be better to use three
rows than spread the data across seven columns, with wrong content in
several of them.
On 2024-05-12 22:08, Andy wrote:n
You should be able to do that on the table layout view Just cut and past
as required in the footprint field.
Andy
On Sun, 12 May 2024 21:40:31 +0100
"John Woodgate"<jmw@...> wrote:
Yes, I did, but the connections and crossings seem to be preserved. Now
I wish that there was a way to assigning the same footprint to all the
resistors in one operation, instead of 61 separate operations. It's a
smaller issue with capacitors, because they don't have all the same
footprint.
On 2024-05-12 21:04, Peter Ayearst wrote:
John,
Did you find the same thing as I fid?? Connection dots did not import
jnto KiCad?
Peter
--
Signature OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh, Essex UK
Keep trying
--
This email has been checked for viruses by AVG antivirus software.
www.avg.com
--
Signature OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh, Essex UK
Keep trying
