开云体育

Arbitrary copper [1 Attachment]

Donald H Locker All Messages By This Member #22366 Remember to measure the temperature. Cu has a significant positive tempco. (A product I worked on used battery cables as current sensors in a vehicular application. Copper's tempco was a challenge.) Donald. -- Plain Text email -- it's an accessibility issue () no proprietary attachments; no html mail /\ <> toggle quoted message Show quoted text On 2018-12-14 6:10 p.m., Lev leventelist@... [kicad-users] wrote: On Wed, 12 Dec 2018 20:29:45 -0800 "'Norman Butler' email@... [kicad-users]" <kicad-users@...> wrote: Hi, I have done footprints with extra copper on the surface. Just draw them on the silk screen layer, then edit by moving them to the required copper layer. I have even copied them over and move them to the mask layer. This is how you can make fancy copper pads on one side of the board only. I have done that with Kicad v. 4.07 but have not tried it on 5.0 Good luck . This reminds me my gEDA time, when I had to do such fancy stuff... but thanks for the idea. I've come up with adding extra pads. If you are interested in a 0.001 Ohm resistor made by copper, here is my take. Cheers, Levente

Previous Topic Next Topic