开云体育

Thank you. The symbol was wrong and is now fixed.

It is telling you it is is not connected. This is a common problem if people design symbols with an inappropriate grid. Best is to use 1.27mm (0.05") for schematics and symbols.

You can select things, right click, and "align to grid" but that only works if the symbol and schematic grids are compatible (i.e. typically 0.05")

On 2024-09-06 9:40 a.m., John Woodgate via groups.io wrote:

I am getting warnings related to two pins of one symbol 'Symbol pin or wire end off connection grid', even if I set the grid to 0.1mm. Can I just ignore these warnings?

-- 
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying

Virus-free.

-- 
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying