It is telling you it is is not connected. This is a common problem
if people design symbols with an inappropriate grid. Best is to use
1.27mm (0.05") for schematics and symbols.
You can select things, right click, and "align to grid" but that
only works if the symbol and schematic grids are compatible (i.e.
typically 0.05")
On 2024-09-06 9:40 a.m., John Woodgate
via groups.io wrote:
toggle quoted message
Show quoted text
I am getting warnings related to two pins of
one symbol 'Symbol pin or wire end off connection grid', even
if I set the grid to 0.1mm. Can I just ignore these warnings?
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
