I don't think anyone said that you have to buy
the part. I said that I don't often buy from Digikey or Mouser
because that often means paying a very high delivery charge.
And, of course, you can't get the files if the part is not
stocked.
On 2024-08-24 17:42, John Hudak wrote:
I may have missed something....It seemed to be
implied that one has to buy the part from digikey or moused and
then you would have access to the physical details, e.g. foot
print etc.? Is that the case?? The last time I did this, these
diagrams/files were free.? Admittedly this was quite a while
ago...
Ah, That is the log (audio) version. I
looked for the linear version, but obviously the
footprint is the same, so I'll take up your kind offer
of the files.
On 2024-08-24 16:44, Tony Casey wrote:
Funny, I found the ALPS ALPINE
RK11K11410KA on Farnell UK - they have 96 in stock at
?2.23 at 1off. Is this not what you want?
They also have the full complement of PCB files, which I
have downloaded. If you still want to use this, I'll send
you the KiCad files to your private email.
--
Regards,
Tony
On 24/08/2024 17:21, John Woodgate wrote:
Farnell doesn't have the part, but Componentsearch
lists it, so I asked it to build the footprint, which
it flatly refused with a big red banner! I wonder what
the problem is.
On 2024-08-24 12:10, John Woodgate wrote:
Thanks, Tony. Yes, I have
occasionally been able to buy from Mouser and
Digikey without paying the huge devilry charges. I
have found a solution to the trimmer pot: I have
some with the same layout as TO-5. Now I'm looking
for the footprint of Alps RK11K114, which is a
spindle pot, the filter frequency control. I have
found the dimensions from Mouser., but obviously I
will try to follow up your extensive advice about
Farnell and ECAD.
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
John Woodgate