I may have missed something....It seemed to be implied that one has to buy the part from digikey or moused and then you would have access to the physical details, e.g. foot print etc.? Is that the case?? The last time I did this, these diagrams/files were free.? Admittedly this was quite a while ago...
Ah, That is the log (audio) version. I looked
for the linear version, but obviously the footprint is the same,
so I'll take up your kind offer of the files.
On 2024-08-24 16:44, Tony Casey wrote:
Funny, I found the ALPS ALPINE RK11K11410KA on Farnell UK - they
have 96 in stock at ?2.23 at 1off. Is this not what you want?
They also have the full complement of PCB files, which I have
downloaded. If you still want to use this, I'll send you the KiCad
files to your private email.
--
Regards,
Tony
On 24/08/2024 17:21, John Woodgate
wrote:
Farnell doesn't have the part, but Componentsearch lists it,
so I asked it to build the footprint, which it flatly refused
with a big red banner! I wonder what the problem is.
On 2024-08-24 12:10, John Woodgate
wrote:
Thanks, Tony. Yes, I have occasionally
been able to buy from Mouser and Digikey without paying
the huge devilry charges. I have found a solution to the
trimmer pot: I have some with the same layout as TO-5. Now
I'm looking for the footprint of Alps RK11K114, which is a
spindle pot, the filter frequency control. I have found
the dimensions from Mouser., but obviously I will try to
follow up your extensive advice about Farnell and ECAD.
--
OOO - Own Opinions Only
Best Wishes
John Woodgate
Keep trying
