开云体育

Yes, that was the problem, but the designations need to show in order to put the components in their places.

I agree that this just sounds like the layers are switched off

usually on the right hand side of the window there is a panel with some
tabs Layers Objects Nets 

Select layers and make sure there is an eye symbol and not a stop symbol.

It's quite common to turn off the silkscreen and other layers as they can
cause a lot of mess on screen when you are trying to lay out a board.

Andy

On Sat, 18 May 2024 19:54:52 +0100
"John Woodgate" <jmw@...> wrote:

Thank you. I will check that.

On 2024-05-18 19:41, CW via groups.io wrote:

* Double-click a footprint in the PCB editor and make sure 'Show' is
ticked in the relevant field checkboxes.

* Depending upon which board layers you have set to Visible, you may or
may not see certain text items. Check, for example, whether Fab and
Silkscreen layers are 'Off'.

On 5/18/2024 11:00 AM, John Woodgate wrote:  

I have drawn a schematic and corrected all the errors. When I switch to
PCB, the footprints appear but no designations and other text for them.
I cannot find any setting that would make the designations visible or
not. Please advise.

-- 
Signature OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh, Essex UK
Keep trying

	Virus-free.www.avg.com

<#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
 

-- 
Signature OOO - Own Opinions Only
Best wishes
John Woodgate, Rayleigh, Essex UK
Keep trying

-- 
This email has been checked for viruses by AVG antivirus software.