开云体育

This is a place for temp files, other than administrative files. Either they are to be added to the next release, added to the Documents or will have a short life span. Groups.io has free subscription storage limit of 1 GB! The following are counted towards the storage limits for the group: - Files - Photos - Images in databases - Images in wiki pages - Message attachments 1. Please put files into the correct folders. - If there is not an appropriate folder, feel free to create one. 2. If you are working on a problem and want to load info for others to look at, create a folder within the 'Problems Being Worked On' folder using the Msg number or you name as the folder name. When the problem is resolved please delete the folder. 3. All files and photos are subject to removal at the moderators discretion. Your Moderators -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most cases, but there are HUGE numbers of possible configurations for DCC systems, and Windows, Linux, and Mac computers out there. Just asking "How do I get it to work" is NOT going to get you any useful help. When asking ANY question, you should >>>utilize a meaningful subject line<<< that indicates the problem and include the following information in the body of the message: + If JMRI has started copy and paste the System Console into the body. (its under help on the start screen) + Has JMRI worked before on this computer? + JMRI version + Previous version if you just upgraded + Java version + Previous version if you just upgraded + Computer make and model + if you have just upgraded, from which version + Any other DCC devices in use + Specific details of your difficulty including error messages if any, or what you would like to do with JMRI. Decoder Programming, Signals, Automation, etc. Depending on the nature of the problem, you may need to supply even more information, but this is the absolute required for anyone to give you accurate answers. Signing you post helps keep the group friendly and personable! Your moderators and trouble shooters.

Please use "meaningful subject lines" when starting topics. We are getting lots of subject lines that don't give much if any idea of what the topic is about. By providing a meaningful subject line you may get the attention of someone that can provide you assistance with your issue. It also give others the chance to skip the topic if it is not of interest to them. -- Peter Ulvestad JMRI Users Group Moderator - https://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more experienced JMRI users. General DCC and model railroading topics should be taken to a more appropriate forum and NOT be posted here. SPAM of any kind, politics, legal issues, and other off-topic matters should NOT be posted to the list and will be subject to deletion by the moderators, as will any responses to such off-topic matters. New members still on moderated status will find that off-topic posts will not be approved for posting, and old members making such posts may find themselves back on moderated status. BUY / SELL and ADVERTISING is NOT PERMITTED Let's keep things simple for all of us, and keep the discussion here on-topic. Your moderators

Ken, et al. it there a what to change a CV value in the webThrottle.html via javascript? Darrin

The example for LogixNG Tables "yard ladder example" does not contain a table? I am puzzled, while in the explanatory text for this tutorial a table is used?

EngineDriver users, Peter Akers has continued his tireless efforts to keep EngineDriver the best wifi throttle app, and we have released a new Beta version for your review and feedback. Thanks Peter! and thanks to all EngineDriver users! The Beta should automatically update shortly (unless you've disabled that feature or installed manually). The changelog is here: https://enginedriver.mstevetodd.com/changes/index.html#beta-changes As always, feedback is welcomed and appreciated. --SteveT

I'm looking for a simple way to move any loco from the staging track (siding/yard) to the block where the warrant will start. Conceptually the solution would: Use a loco/consist address supplied (e.g. from a memory variable) Drive the train until a sensor (block occupancy) is triggered. Assume a clear path has been established (user responsibility) Thanks. -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic jre-17.0.12.7 Windows 10

I am trying to set up an ESU Loksound 5 decoder programmed by my dealer. The prime mover sound works, I can change the master volume ok, the lights work, I can dim the lights ok in the Function Outputs tab, I try to change CV163 (horn) and CV164 (bell) but the horn sound does not change and it sounds like a plastic toy. It does respond to the master volume. Default Sound slots 3 (horn) at 225 and 4 (bell) at 70. Changing these values does nothing. The bell has never made a peep... it is like there are no sound files loaded. (I do not have a Loksound programmer). What am I missing? Thanks for your help, -Paul in Utah Bulletin: EMD 16-567D3 T Manufacturer: ESU, Item number: S0758, Version: V5-R5

OperationsPro users, there's a new feature that I would like feedback on. There's now a control for local moves in a train's route. See https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#PullsAndSpots for more information. Any comments, good or bad are welcomed. Dan

Keyboard Shortcuts for PC and/or Mac for Panel Pro... are there any?

I have my windows 10 laptop running JMRI v5.6 with DCC-EX running on an Arduino uno, connected to my laptop via USB, paired with the DCC-EX MotorShield8874. When I open the ‘voltage / current meter’ in Panel Pro, all I get is hyphens - no actual current reading in digits. I’ve had the current meter working before, on an older version of JMRI, running a standard motor shield with the Arduino, but I’ve not tested the current meter since I fitted the new 8874 motor shield. I wanted to check there isn’t anything I’ve missed or failed to configure specifically in JMRI for this before looking into the hardware. Many thanks, Dan

Hi All, sometimes, fortunately very very seldom, an auto-train running under Dispatcher on our Club layout loses next Signal and so it does not stop although that Signal is set to Stop. I mean there is no next Signal in the Dispatcher window in those situations. On one side I am investigating with the help of System Consolle but on the other side, since our goal is safety first, I would like to stop the train when this behaviour happens. Is there a way to use LogixNG or scripts? I am not able to get/drive the decoder address of the running train in the block where it should stop. Thanks for help! Giuseppe Di Biasi ___________________________________ JMRI 5.10 MacOS Monterey 12.7.6 Windows 11 Java 17

Bob et al - Looks like the signing issue again. (macOS 15.5, Java 17) Fred Dalzell

Good Afternoon, I currently have a layout running with the following set up: NCE Power Cab Raspberry Pi running JMRI using M Steve Todd's file This is connected to the layout via an NCE USB Adapter The Raspberry Pi runs a touchscreen which I have set up as a control panel and operate turnouts from this - the panel itself effectively is fullscreen on the Raspberry Pi touchscreen. I'm looking at expanding the layout, and realistically it would need a second control panel for the extension - I don't really want to redraw the existing panel and reduce the size of the panel itself as it's currently very user friendly. From reading the various JMRI documents, I'm not entirely sure how to go about this - it is clear that I can only have one Raspberry Pi unit connected in via an NCE USB adapter , but am I correct in saying that if I network a second Pi to the main one, either via the built in wifi or an ethernet cable, this is feasible? From my limited understanding, you can load up two separate panel windows and switch between them ,so am I correct that if this is the case, the original Pi panel can effectively stay as is, with the new Pi Panel running as a networked unit and showing just the additional panel? thanks in advance

Example from here. I guess there is some assumed/unmentioned hoop through which this newbie has not jumped :) Downloaded and unpacked the example zip. Opened the contained XML with Panel Pro > load all panels and table. Can see the panel, click a track sensor, sensor changes but no points. Had a look in sensor, turnout and logixNG tables which look something like this novice might expect. Then I tried the logixNG tables table(!) and spotted the described Yard Ladder sensor/turnout table was missing. Loaded the table from the zip-contained CSV. No change - sensors still change on clicking but the points do not follow. What am I missing, please?