开云体育

This is a place for temp files, other than administrative files. Either they are to be added to the next release, added to the Documents or will have a short life span. Groups.io has free subscription storage limit of 1 GB! The following are counted towards the storage limits for the group: - Files - Photos - Images in databases - Images in wiki pages - Message attachments 1. Please put files into the correct folders. - If there is not an appropriate folder, feel free to create one. 2. If you are working on a problem and want to load info for others to look at, create a folder within the 'Problems Being Worked On' folder using the Msg number or you name as the folder name. When the problem is resolved please delete the folder. 3. All files and photos are subject to removal at the moderators discretion. Your Moderators -- Peter Ulvestad JMRI Users Group Moderator - http://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

====================== HOW to ask your question ====================== One of the most common questions about JMRI is "How do I get it to work?". This isn't really a problem with JMRI itself in most cases, but there are HUGE numbers of possible configurations for DCC systems, and Windows, Linux, and Mac computers out there. Just asking "How do I get it to work" is NOT going to get you any useful help. When asking ANY question, you should >>>utilize a meaningful subject line<<< that indicates the problem and include the following information in the body of the message: + If JMRI has started copy and paste the System Console into the body. (its under help on the start screen) + Has JMRI worked before on this computer? + JMRI version + Previous version if you just upgraded + Java version + Previous version if you just upgraded + Computer make and model + if you have just upgraded, from which version + Any other DCC devices in use + Specific details of your difficulty including error messages if any, or what you would like to do with JMRI. Decoder Programming, Signals, Automation, etc. Depending on the nature of the problem, you may need to supply even more information, but this is the absolute required for anyone to give you accurate answers. Signing you post helps keep the group friendly and personable! Your moderators and trouble shooters.

Please use "meaningful subject lines" when starting topics. We are getting lots of subject lines that don't give much if any idea of what the topic is about. By providing a meaningful subject line you may get the attention of someone that can provide you assistance with your issue. It also give others the chance to skip the topic if it is not of interest to them. -- Peter Ulvestad JMRI Users Group Moderator - https://www.jmri.org ( http://www.jmri.org ) Tam Valley Group Moderator - https://tamvalleydepot.com/ ( http://tamvalleydepot.com/ ) Sprog-DCC Group Moderator - http://www.sprog-dcc.co.uk/ ( http://www.sprog-dcc.co.uk/ ) Edmonton Model Railroad Association - http://www.emra.club/

We would like to point out that this list is for discussions related to JMRI, and is intended to be a place that people, particularly beginners, can turn to for help with their JMRI problems from more experienced JMRI users. General DCC and model railroading topics should be taken to a more appropriate forum and NOT be posted here. SPAM of any kind, politics, legal issues, and other off-topic matters should NOT be posted to the list and will be subject to deletion by the moderators, as will any responses to such off-topic matters. New members still on moderated status will find that off-topic posts will not be approved for posting, and old members making such posts may find themselves back on moderated status. BUY / SELL and ADVERTISING is NOT PERMITTED Let's keep things simple for all of us, and keep the discussion here on-topic. Your moderators

Example from here. I guess there is some assumed/unmentioned hoop through which this newbie has not jumped :) Downloaded and unpacked the example zip. Opened the contained XML with Panel Pro > load all panels and table. Can see the panel, click a track sensor, sensor changes but no points. Had a look in sensor, turnout and logixNG tables which look something like this novice might expect. Then I tried the logixNG tables table(!) and spotted the described Yard Ladder sensor/turnout table was missing. Loaded the table from the zip-contained CSV. No change - sensors still change on clicking but the points do not follow. What am I missing, please?

Good Afternoon, I currently have a layout running with the following set up: NCE Power Cab Raspberry Pi running JMRI using M Steve Todd's file This is connected to the layout via an NCE USB Adapter The Raspberry Pi runs a touchscreen which I have set up as a control panel and operate turnouts from this - the panel itself effectively is fullscreen on the Raspberry Pi touchscreen. I'm looking at expanding the layout, and realistically it would need a second control panel for the extension - I don't really want to redraw the existing panel and reduce the size of the panel itself as it's currently very user friendly. From reading the various JMRI documents, I'm not entirely sure how to go about this - it is clear that I can only have one Raspberry Pi unit connected in via an NCE USB adapter , but am I correct in saying that if I network a second Pi to the main one, either via the built in wifi or an ethernet cable, this is feasible? From my limited understanding, you can load up two separate panel windows and switch between them ,so am I correct that if this is the case, the original Pi panel can effectively stay as is, with the new Pi Panel running as a networked unit and showing just the additional panel? thanks in advance

Ken, et al. it there a what to change a CV value in the webThrottle.html via javascript? Darrin

My layout is DC cab control, servo points, neither occupation sensors nor signals. Windows JMRI + MERG CBUS. Panel editor panel. NX routing to set and show points, routes and block cab allocation. Early days, layout under construction, JMRI being understood. On a simple simulated test panel I've been able to set and show points, routes and allocated blocks with NX. I would like also to use this process to allocate and show the (one of five) route control cab. It looks like LogixNG (user level currently novice!) might do this. I might click a one-of-five cab select sensor button group before setting an NX route. This selection is then available during the NX setting process. Is there a way to vary the block alternate colour used to indicate an allocated block during this process, please? It's nagging at me that I've seen a forum query on exactly this subject but despite quite deep digging and repeated searching I can't find it (or indeed anything). I suspect there is a rune to cast that will unlock my current very limited understanding!

Keyboard Shortcuts for PC and/or Mac for Panel Pro... are there any?

Anyone up for a job? How much would you charge to make me code? To parse the data coming from the packet analyzer and update the locomotive roster with new running time. Maybe make some stats out of the data coming back....

Build 2361 fails to launch on macOS arm64 (15.5, Java 17). Build 2360 works fine. Fred Dalzell

Hi there, I am experiencing an issue with JMRI, I am using the latest 5.10 production release. I experienced similar issue with the previous version. I am using a Lenz LVZ100 command station with a serial interface on a raspberry pi. Everything works as expected, but after a while, the queue for a DCC address stops being treated. I mainly run my trains through custom jython scripts. The only workaround I found is to restart JMRI. When this happens any JMRI tool is useless for a specific address (withrottle, jmri throttle, web throttle...), but that address can still be controlled with handheld command outside JMRI. I enabled trace log level and here is what I get. In this example address 2 is stuck while address 9 works fine at the same time. Not processing queue : 18:31:08,106 jmri.jmrix.lenz.XNetThrottle DEBUG - set Speed to: 0.09 Current step mode is: 28 SS [Speeder : TGV V150 (DCC 2)] 18:31:08,107 jmri.jmrix.lenz.XNetThrottle DEBUG - adding message to message queue [Speeder : TGV V150 (DCC 2)] 18:31:08,608 jmri.jmrix.lenz.XNetThrottle DEBUG - set Speed to: 0.0 Current step mode is: 28 SS [Speeder : TGV V150 (DCC 2)] 18:31:08,608 jmri.jmrix.lenz.XNetThrottle DEBUG - adding message to message queue [Speeder : TGV V150 (DCC 2)] Processing queue (same session) : 18:31:33,841 jmri.jmrix.lenz.XNetThrottle DEBUG - set Speed to: 0.03 Current step mode is: 28 SS [Speeder : TGV Poste (DCC 9)] 18:31:33,842 jmri.jmrix.lenz.XNetThrottle DEBUG - adding message to message queue [Speeder : TGV Poste (DCC 9)] 18:31:33,842 jmri.jmrix.lenz.XNetThrottle DEBUG - sending message to traffic controller [Speeder : TGV Poste (DCC 9)] 18:31:34,083 jmri.jmrix.lenz.XNetThrottle DEBUG - Throttle 9 - received message 01 04 05 [AWT-EventQueue-0] 18:31:34,085 jmri.jmrix.lenz.XNetThrottle DEBUG - Status Timer Stopped [AWT-EventQueue-0] 18:31:34,085 jmri.jmrix.lenz.XNetThrottle DEBUG - message queue empty [AWT-EventQueue-0] 18:31:34,343 jmri.jmrix.lenz.XNetThrottle DEBUG - set Speed to: 0.06 Current step mode is: 28 SS [Speeder : TGV Poste (DCC 9)] 18:31:34,343 jmri.jmrix.lenz.XNetThrottle DEBUG - adding message to message queue [Speeder : TGV Poste (DCC 9)] 18:31:34,343 jmri.jmrix.lenz.XNetThrottle DEBUG - sending message to traffic controller [Speeder : TGV Poste (DCC 9)] 18:31:34,626 jmri.jmrix.lenz.XNetThrottle DEBUG - Throttle 9 - received message 01 04 05 [AWT-EventQueue-0] 18:31:34,627 jmri.jmrix.lenz.XNetThrottle DEBUG - Status Timer Stopped [AWT-EventQueue-0] 18:31:34,627 jmri.jmrix.lenz.XNetThrottle DEBUG - message queue empty [AWT-EventQueue-0] Any ideas greatly appreciated. Adrien

I have my windows 10 laptop running JMRI v5.6 with DCC-EX running on an Arduino uno, connected to my laptop via USB, paired with the DCC-EX MotorShield8874. When I open the ‘voltage / current meter’ in Panel Pro, all I get is hyphens - no actual current reading in digits. I’ve had the current meter working before, on an older version of JMRI, running a standard motor shield with the Arduino, but I’ve not tested the current meter since I fitted the new 8874 motor shield. I wanted to check there isn’t anything I’ve missed or failed to configure specifically in JMRI for this before looking into the hardware. Many thanks, Dan

I want to run a Jython script inside of jmri so I can manipulate turnouts, etc. However, the script doesn't recognize openpyxl when I try to import it. I need openpyxl to access an Excel spreadsheet. How do I import openpyxl? Thanks in advance, Nick