开云体育

Try reading his post properly - he is talking about the version number of XtrkCAD, not JMRI.

I am using a micosoft Suface running Windows 10 Pro. When I close my panel by clicking on the cross in the top right hand corner of the display containing my panel, I say "Yes" to the pop up which

Hi, Just a small correction. American prototype terminology does not use 'Closed' and 'Thrown' for switch (turnout) positions. I just checked one current rule book, and it uses 'Normal' (main route)

Hi Larry I really don't like those grids, they don't expand with the frame and someone programmed them to limit max col width. Any hows, again... You current transit looks good, (a quick erase of

Eric Thank you for your help it turned out to be the driver had to use the Legacy Driver i needed to use thank you or your help its a bitch getting old Gordie Connelly gordie@... 248

Well one is a BLI Paragon 3 (I think it is a BLI Decoder) and the other is a TCS w/KA (Alco RS-3)

In JMRI 4.11.4 New Control Panel Add Text Drag "Sample" to empty panel Bold text font style cannot be changed once it has been added to the panel - It always indicates Bold even if it is not Bold.

A bit of background in response to the points below: 1) You _can_ set the locale for just JMRI, without affecting anything else on your computer. Preferences -> Display -> Locale, set, save, restart

Ahhh, That explains it. I must have missed that change. New bookmsrk added and old one deleted. Thanks for that! Tom Wilson jmriusers@...> wrote:

http://jmri.sourceforge.net/ isn’t the right link for the home page. That’s the old webserver, no longer being updated. The correct link is http://jmri.org If you have the jmri.sourceforge.net

Harold, One thing I do for testing purposes is to place a sensor icon next to every block on the panel. Then in the 'simulator' profile, I run a script that sets all sensors to inactive after loading

Thanks Ken, Yes, Sections are in the correct order. I have gotten it all the way to the last section. The last section is in Reverse direction as it takes a diverging leg of a turnout. I have it going

One thing I've found while building the transit is the sections that get selected after the first one may not be in the order you would expect. So you have to look closely to pick the right 'next'

Thanks Steve. I did take another close look at the sections, and believe I understand them a bit better. The problem I have is on one of the sections. After adding the blocks, I am trying to set the

Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the jmriusers group. File : /Moffat.xml Uploaded by : landes_l <larrylandes@...>

Fraser, The Continuing Route Turnout State was the modification made so that both naming schemes could be integrated. The UK system was built around the safety concept that the Main Running line was

Ken/Dave - we're almost there!? I recreated the sensors as NCE items and then tried to run the script - it failed because it couldn't find the turnouts.? I discovered that, not only had the sensor

HI Larry Cant find the uploaded panel, any hows.. When you create section 1 and add the blocks, it will give you block x (connected to either block 1 or block 2) enters block y (either the block 1 or

Ken, Try adding the following lines before the class statement. import java import jmri Also look at the system console for errors. Dave Sand

This script won't run in JMRI 4.11.4ish. Is something missing? Thanks, Ken # Sample script showing how to set multiple sensors to # specific positions, with a time delay between them, # separately