开云体育

Mouser Digit Key Allied. All have huge inventories and great web sites. I use mouser a lot since it I close and ups or fed x ground delivery is only 2 days. Jim

No possibility it's repairable?? --Paul E Musselman .

Or, one could save one’s self a lot of time, effort, and tears by simply replacing whatever DCC system one has with any of the NCE systems that already handles all of this for you, including the

/On 8/5/2018 9:40 AM, haythornthwaite@... wrote:// / Reason Digitrax doesn't sell the DCS210 separate:-DVBG! A solution! This is what I would do. ??? Mailorder +/- $340.? Throttle -$140 or

Group: Off topic a bit... but since a lot of what JMRI interfaces with is DIY electronics... Being in north central New Jersey we still have a real electronics store Greenbrook... on the infamous

Hi Bob and team Have you been able to look at the startup menu and found why it's partly using the local Windows language instead of the one selected in the preference menu? I currently use 4.13.1 and

I just dropped my DCS51 and it's dead and I need a new command station and booster but I don't really need a throttle because I use JMRI via a PR3EXTRA. My head says to buy a new Zephyr because it

I have defined Signal Mast with matrix of 5 logic outputs - turnouts. On LocoNet connection it works OK. On XpressNet connection I have problem. When I change aspect it works very slowly. Two turnouts

Well the Hobbytown, near hear, went away 2 years ago. Good for anyone that can use it. I suspect their inventory will be pretty limited. I buy that kind of stuff on eBay, good prices and cheap/no

John and Bob, Thanks for the suggestions. I have reviewed the help section for bouncing. I am unable to find any information that addresses being bounced due to being blacklisted. The bouncing

On 8/5/2018 11:12 AM, Bob Jacobsen wrote: > Unfortunately, working with things like CVs has a lot of similarity to low level firmware/machine code. Lots of worrying about individual bits; not enough

Nope not in edit mode. I was in programming on the main, DDDDOOOOOHHH!!! John

After resetting you cars where you want them and resetting move counts to zero, use the backup button in the setting panel to create a known situation you can restore to if you should need to. FYI. I

Hi Tom, You can also buy electronics components at Micro Center in their hobby section.? That's where I got a replacement Arduino board after I "bricked" one. Thanks, Damin.

Unless you are running Windows XP and did the patch update will set you back then DP will not work

Unfortunately, working with things like CVs has a lot of similarity to low level firmware/machine code. Lots of worrying about individual bits; not enough information on what those bits do! An

On 8/5/2018 6:44 AM, Nigel Cliffe wrote: > > Assuming this is “on the main line” for all locos, you’re not taking them off to a programming track mid-session, and a DCC system with no special

Assuming this is “on the main line” for all locos, you’re not taking them off to a programming track mid-session, and a DCC system with no special capabilities to manage consists. Then… If the

Thanks all for the replies. Looks like I'll just get a regular laptop. Julius Olajos

No Hobbytown stores close to me but I do h