开云体育

Bob, I upgraded to 4.17.4 yesterday and I still get those errors. Ken says he has a work around that will fix this. I will try it. Thanks, Ken

Thanks Tom, I don't normally have a problem downloading.? I have the same Avast? security on all my PCs. Just?wondering why I' having a problem today. First thing that comes up is a box telling me

Every time a new version is released, the various anti malware and anti virus programs think it is contaminated. Hundreds of posts in this forum to that effect. You need to first make sure you are

Yesterday(10th) I was able to install 4.17.4 on one of my Win7 PCs ( I have 4 and 2 laptops.) Today I am continuing to upgrade but I am prevented by my Avast security system. It is telling me that?

A folder called "operations" with all your other user files unless you have moved them. The easiest way to locate your user files is to click on help within JMRI and then click on Locations. --

I did not see any LED activity with the first test. The power cab working great. With the second test i noticed a quick flash when i plugged in the cable from the PowerCab. But no more

I learned quite a bit by going on YouTube and searching ‘JMRI Operations’. There are quite a few videos, some much better than others. -- Mike Heintzman Modeling the P&PU since 1953

Hi All, I have transferred my JMRI files across to my Rasberry Pi but cannot seem find the operations file for my Wagons, can anyone tell me where to find them on my win10 machine. Thank you Brian

Running with the Pi 3B+.? ?I have a heat sink on mine and noticed it running hot so I added a fan on the case.? I have another 3B+ runing Retropie for games.? Dont have to use a fan on it.? I'm

Bob: This is the link I used to try to reduce the temps on my very early score of a Pi4... https://www.raspberrypi.org/forums/viewtopic.php?f=28&t=243500&p=1490467&hilit=vl805#p1490467 Worked, but

No overheat issues on the Pi4???? I have been holding off given? the buzz on the forums about the thermal issues. Stretch is a known no-go on the Pi4+?

Thanks Stuart. I have just rewritten the software in my current LCC hardware clock to use the draft time protocol.? I can use a minute change watcher to send the info but as 4.14 and 4.17 release

Thanks Matt John

Don The autodetect mode of Steve Todd's RPi-JMRI image can only detect the DCC system interface, not the command station type, and has a "DCS100 (Chief)" command station as default in the profile

Luke, The tests have shown that it's not simply a baud rate issue. Make sure the baud rate is back to 19200 to match the jumpers. Did you notice any LED activity (either one) during the tests?

Another issue. Is there a way to make the xset cmds a permanent setting. It appears i need to set these each time i boot up. Don [email protected]> wrote:

It was a bad connection in my wiring. The switch servo works good using the loconet switch LT1 with the Pi. Please ignore the previous post. Control both from the panel and the Zephyr. Now to test

Alright so i think i? have successfully re installed the driver. The comport now shows up as 10 and i have changed to port 10 in decoder pro preferences. Here is my log 2019-09-10 22:45:36,071

Nom, There are few known bugs with the implementation.? This is one of them.? There is a hardware fast clock in development that will work with the JMRI fast clock over OpenLCB/LCC.? I'll ping the

No problem Dave! Thank you for repsonding. Here is my 9600 baud JMRI log 2019-09-10 22:25:50,223 util.Log4JUtil? ? ? ? ? ? ? ? ? ? ? ? INFO? - * JMRI log ** [main] 2019-09-10