开云体育

Hi Dan, In my OperationPro 'settings', both 'auto save', and 'auto backup' have been selected. I 'restored' an 'auto backup' file previous to 24-07-30.? Now I can make changes in Car, Routes,

Richard, The details about the JMRI objects are in the Javadocs: https://www.jmri.org/JavaDoc/doc/ This list of "shortcuts" in the initial help page are the "managers" for common JMRI objects. For

Thanks Dave. I’ll give the Sensor Table approach a try. Regards. Derek.

Derek, There are a multitude of initialization solutions using LRoutes, Routes, Logix, LogixNG, or scripts. The easy solution for internal sensors is selecting the "Initial Sensor State" menu item

Good Day I have created an internal sensor IS4 on my PanelPro layout diagram. I want this sensor to be set to INACTIVE on startup of JMRI. This sensor, when manually selected, will indicate the

I use a Pricom Design "Layout Lighting Solution" (LLS) board as a DCC/DMX gateway. It connects directly to the DCC bus and translates turnout commands from JMRI to control DMX devices. It has an

David, "I would use a script to start the train using the train info file. There are options to override some of the defined fields, such as the DCC address or roster entry. " That's what I hoped

Bob and all, So far everything seems to be working. After installing the debug build I restored my profile from a backup. upon restart JMRI rebuilt the decoder index and completed the startup (at

Could you try JMRI 5.9.3 please? It’s got a fix to allow more outstanding messages: https://github.com/JMRI/JMRI/pull/13308 That fix was merged after the development release you’re using

Bob and all, Sorry for the delay, I was out of town. Will try it and let you know the results. I'm using Windows 11. Gil

Chris, It might be that JMRI closes the connection when it times out. The log you sent before had these lines: Can't publish : [AWT-EventQueue-0] response from the server So it could be that the

Darren, Totally separate address ranges. And the IS range is completely free as it is JMRI internal. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com

Hi Daniel - it appears to be JMRI that closed the connection - 2024-09-03T19:03:14: Client TheLoftJMRI8EB8A1FEM closed its connection. There had been a high volume of messages in the minutes leading

Chris, What happens is that the connection gets disconnected. Can you look at the logs for the MQTT broker to see if it's the broker or JMRI that disconnects the connection? The important part of

Not really. David was the one that kept all that info and research. We talked about it. I remember at the time, and this goes back pre-pandemic, I had found a company in Italy that from the looks of

Hi! I discovered the other day that the MQTT timeouts and exceptions are not specifically connected to startup - they're actually caused, I now believe, by a high volume of MQTT messages being

Leo, Do you have a link to DALI? And information on where to buy it? Daniel

- "IS" numbers are not directly associated with any "LocoNet" address, so are not restricted by LocoNet limitations in _any way_. In general, JMRI objects with "system names" that _begin_ with "I"

With a Digitrax system, I'm aware that LT1017 to LT1020 are resevered for Loconet use, however is there any issue using LS or IS in this number range? Thanks, Darren

Ken, the late Parks really liked the DALI lighting control, which is newer than DMX. Since this format is mostly in Europe, has anyone in Europe tried with DALI. (or hopefully here in the