开云体育

Dave, Perhaps this decoder requires 28 speed-step operation for speed table use. This was very common with early decoders. IIRC, your DCC system is Digitrax; try ‘Status Editing” the address for

Scott, Try putting a sensor icon(select any sensor) *near* the upper left corner of the panel and then *move* it to the upper left grid box. The move is important. When you right click the icon, the

Has anybody had any luck trying to slow down an Athearn Genesis F7 with a MRC dual mode decoder? I can read the model number, 31, but there are no 31's listed in DecoderPro for an MRC decoder. I can

Scott, Do you have "SignalHeads/SSL" or "SignalMasts" selected in your Dispatcher Options panel? I would think you want "SignalMasts", but that crash is coming from code related to "SignalHeads".

Guys: Without doing the chmod 666 /dev/ttyUSB0,? JMRI would error out on start up with "/dev/ttyUSB0 is already in use".?? There was no lock files in /var/log either. I'll run the two scenarios

The panel ("Pennsy West Main") can be found in the ProblemsBeingWorkedOn, in the Scott_Walton folder. The environment is Windows, JMRI 4.19.2 (and current code), Java 1.8_181, Digitrax or LocoNet

I'll try again on the real railroad -- I tried it on a different machine (with the current JMRI code) with LocoNet Simulator and can run the trains (using the AutoActiveTrainsSimulator script). It

Hey Dan, In my staging town my tracks are as follows, track 01, track 02 and so on till track 99. So if I manually pick my tracks they should line up and stay that way or will that be too much to ask

Bob, It is a layout editor panel. I have a clue as to what is happening but more research is required. Dave Sand

The Transit that gave me the error was B24_Loop. I've also uploaded the script to the same folder ("crossing_signals.py"). Scott Walton

Test version 4.19.3 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in early summer 2020. It’s

Ok, thanks Dan Matt Greenwood

Scott, Which transit is creating the error? While not directly related, it would be helpful to upload your cross-over script. Dave Sand

Which kind of panel? -- Bob Jacobsen rgj1927@...

The checkboxes are for anything you want.? The program doesn't use them.? Some folks use the checkboxes when confirming a car's location or status. Dan

Here's the link, in case you missed it: https://www.jmri.org/donations.shtml Steve "Breezlys" (A grateful long-time JMRI user)

Matt, Tracks at a location are listed alphabetically. When building a train from staging, the program will try and depart a train from the least used track.? So if you have 10 tracks, the program

Dennis, I have downloaded the latest Creators version and as a test, used it to make this from my csv file for Train 44 (which was run today in our postponed Op Session).? I had to just edit the

Thank you!

Dave, I am checking my notes and have not found a mention of the SignalHead user information being lost; thus, I can't point you to any work arounds or scenarios that cause or prevent the loss.?