开云体育

That depends on the capabilities of the DCC hardware you are using. Some can be queried, while some cannot. Some which can be queried can report incorrect information. One "workaround" that you may

Dave and Peter: I moved the JMRI data into a folder that I created: Users/cgevaert/JMRI. When I installed the new version of JMRI, I moved the JMRI folder to the Applications folder. When I ran

Billybob, Thanks very much for the additional information.? I have some good ideas on what to look for at the museum on Thursday. I'll post what I find out to the group. Frank Fezzie

Martin, I have confirmed the behavior that you are seeing. I was also able to confirm with a set of Logixs that have worked for years. This statement has always been a part of the Logix help file:

Norb, It is one at a time. I normally do it as I set up each track segment. Change the track segment from a line to a circle; position the end points; hide the construction line. Dave Sand

Phil, The SE8C based signal masts will use the "Signal Head Controlled Mast" driver. The signal heads are defined using "SE8C 4 Aspect". When you are ready to replace a visual mast with a layout

So I made a sensor that turns on and off track power. However when I first load the panel, the status of track power is unknown. Is there a way to query track power status on startup of the panel?

Ok. ... so if I want to turn all of the construction lines off at the same time, I have to do so within the context menu of each track segment one at a time?? Is there a way to select all the track

Hi Ken Yes I have a Se8c and have physical signals that I am corporating into the layout. Can I use my exiting virtual Signal mast in combination with the signal heads? You mentioned that some Signal

Phil, Signal masts are generally better, but some find the logic gets a bit more complex. I think you said you had a Se8c, so you would have to make signals heads (using the turnout addresses) and

A quick search of the JMRI source code reveals that this specific message is displayed by LocoNet connections when JMRI is attempting to "acquire" control of a locomotive (or consisted set of locos).

That is my understanding of the code. I do not have a good handle on this particular bit of JMRI functionality, so I do not have a good answer. I _think_ that it will only happen when loading an XML

Thank you gentlemen So if I understand correctly I will need to change all my Signal Masts to Signal Head. The signal heads that I have created will change colour with the turnout and when there is a

Hi Dan, I also use JMRI WiThrottle to run my locomotives. I have also been able to connect the ProtoThrottle and TCS's new universal wifi throttle through WiThrottle to run TMCC locomotives. I use a

Hi Allen If the USB connections gets it's underwear in a knot the only way out I 've found it power everything off. Pc, command station the lot. If you have a USB that stays alive after power off

I am the original TMCC person with JMRI. I use it all the time. I am a Mac user. With the correct USB to serial converter it will work with all Macs and Mac OS including Big Sur and a M1 silicon unit

If you want, you can send it to me (off list) and I will try to fix it. If so, please tell me which turnouts that are offended if you know which ones. Daniel 2021-03-14 23:32 skrev John Joyce:

I forgot to mention that the "also throw" invert setting must be the same for both sides. Otherwise they fight about what it should be until Java blows up. My policy is that nothing is inverted in

Check the system console for errors (Help => System Console). If there are any, use the "Copy to clipboard" button and paste into a reply. A quick guess is a bad USB cable from the PR4 to the

When you do a store with the same file name, the previous version of the file is moved to the "backupPanels" directory with the date and time added to the file name. Dave Sand