开云体育

If I can add on this this topic. I believe the same thing happened to me just a couple of hours ago. I could not close the JMRI screen so rather than use Task Manger to kill it, I restarted the

Ok that gives me something to chew on. Thank you Daniel!

Vinny, It seems that you want to have a memory with the current volume. And then a ConditionalNG that copies the value of the memory to a local variable. You then does the addition/subtraction and

Daniel - it seems to be part of the language used between JMRI and DCC-EX over USB, have I got that right…? Yes. uno) therefore dependant on a JMRI update before it can work? Yes. Daniel

Thanks Ash. I tried to research more about the <c> and <JI> commands you mention - it seems to be part of the language used between JMRI and DCC-EX over USB, have I got that right…? Is the use of

I added Vinny to the symbol table. now the error is gone but it's not doing what I expect. I am writing to cv63 which is master volume. I have an ng for up and one for down. I want to increase or

The following items have been updated in the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/2025-05-19T061811,413 util.Log4JUti.txt (

rprdds24@... added folder */ProblemsBeingWorkedOn/Startup Gets Stuck* *Description:* Here I am again. I uninstalled and reinstalled Java 17 : 64 bit using the link - thanks. I then restarted my

Would it help to ditch the excel file and store the car information in the roster instead? You'd need to have 600 (necessarily long) dummy addresses to use. Having the cars in a separate roster group

Attached error.

You can manage Excel files as .csv as well as .xls - just choose the format when you save the file Phil G

Could you say a bit more about what problems you’re thinking of for the CSV file? Excel is quite happy writing and reading CSV files from its standard spreadsheets. Bob — Bob Jacobsen

Dave, To answer your question, I have an Excel spreadsheet listing about 600 cars with various information about them like type, road, number, etc. I'm using a barcode reader to identify a car ID as

There are two reasons why the current meter is not reporting. a.? JMRI current meter uses the <c> command to obtain the information from the DCC-EX command station.? With limited memory, the <c>

Vinny, didn't work. What error message do you get? Daniel

Okay, Klaus, thank you very much. I'll try again and let you know.

Depending on the computer and what is now or may ever have been plugged into it, the correct COM port may or may not be COM3. To check which COM port you need to assign into JMRI, open Device Manager,

John, There is no "text editor". You can get a text view of a LogixNG using the Browse option in the Select menu. However, that does not show all of the details. Prior to LogixNG, I would use scripts

Dan, I will give it a try. ?I will need to drop the loco consist prior to the train going back into staging at the end of the route.

Nick, What are you trying to do? ? Example 1: Create a list of sensors in a spreadsheet and use that list to create the sensors in the JMRI sensor table. ? Example 2: Read the contents of turnout