开云体育

I set the barcode reader to factory defaults and followed your instructions. -- ... a = SerialPortDevice() ... a.open("/dev/cu.usbserial-ftE1GQVJ") ... a.start() Opening ?/dev/cu.usbserial-ftE1GQVJ

I upload the file. If I delete sensors and make changes, then I can't set up routes. If I save, I still can't. If I close PanelPro and restart, things are better. If I close PanelPro and restart

The Pi isn't refusing to allow anything to connect, it's not aware that anything is trying to connect - because there's no network. Networks aren't easy things to set up - if you have an old internet

Hi Trevor thanks for the reply , I have had some success The whole idea was to repurpose some old tech to run my layout in the garden shed under dcc , I have an old iPad which is no longer supported

All of the blocks work perfectly with an NX warrant

The following items have been added to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/TWES.xml ( /g/jmriusers/files/ProblemsBeingWorkedOn/TWES.xml ) *By:*

Thanks Dave, The documentation clearly tripped me up there!? As I will only have four characters to worry about, I think three sequential Execute Delayed operations will be the way to go. Thanks for

Hi Rob, In order to detect messages from the loco, you need to have current detection - usually hall sensors in this case - sat between the track and your Arduino. You sound knowledgeable so you may

Nick, The "Execute delayed" actions are queued to execute after the parent has finished. Since you are creating them within the context of a single module call, they all run when the module is ready

Folks,I tried v5.11.6 tonight with a real LCC connection.? In "dark mode" the LCC Node CDI fails with the unrecoverable error detailed in the attached file.? Re-checked with "Windows" mode and no

Rob, Some questions that might help to solve the issue: * When you say the track voltage on the main is 12v, do you mean you are feeding 12V to the motor shield, or you have measured 12V on the track?

I think I may got JMRI 5/JAVA 11 working on my NEW LAPTOP. Not sure when an UPDATE might happen, but if what I have works, I might leave it alone I believe when you get the MACROs setup up? you are

So when you run this through the problem block it works fine? -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic

Sorry, I'm back with another question.? This works perfectly: The module specified at A2 gets called four times in quick succession and the local variables passed to it are as expected.? But, I need

Mike, If you upload your layout data xml file to the group's ProblemsBeingWorkedOn file folder, I can review it and provide some feedback. Dave Sand

That’s unexpected. The same open(..) statement with the same device name worked in the other script. If you want to go back to the jython/serialinput/SerialPortDevice.py script, delete these lines:

Your question is better suited for a DCC-EX forum https://dcc-ex.com/ https://discord.gg/bFHAafZE -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.6, Java 21.0.7 JMRI Users Group Moderator (

Your question is better suited for a DCC-EX forum https://dcc-ex.com/ https://discord.gg/bFHAafZE -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.6, Java 21.0.7 JMRI Users Group Moderator (

Your question is better suited for a DCC-EX forum https://dcc-ex.com/ https://discord.gg/bFHAafZE -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.6, Java 21.0.7 JMRI Users Group Moderator (

ESP32 always updates each time I start EX-installer. How do I make the update stick so that it doesn't do this each time? -- ~gary