开云体育

Hi UP-Railroad(?) What app are you using? If EngineDriver, please post or send me a screenshot of the About screen while connected to your wifi. And send a screenshot of the exact error, use View Log

Recently after some tinkering i was able to get my JMRI up and running with the layout. My main use will be for the wifi throttle capabilities to run trains on my phone. For some reason I'm unable to

I have been trying to track a specific locomotive using the Block Contents variable.? I am able to place a tag object on the layout for the block occupied by a loco (using? BDL 716) and the icon

Thanks, Peter. I have obviously missed the change in the Roster tab options when updating to 5.11.4. It always used to present the first option as “Roster”.

Ken C, Gentlemen, Further to my issue, when I run a loco around the loop with only 1 action being triggered by 1 sensor at a time, thereby spacing out the commands, then all is fine and everything

DecoderPro is the roster. The roster location has not changed. -- Peter Ulvestad Linux Mint 22.1, JMRI 5.11.5, Java 21.0.6 JMRI Users Group Moderator ( /g/jmriusers ) JMRI

Tony, suggest you put up a copy of the dump. -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic jre-17.0.12.7 ? Windows

It’s probably been asked many times before but could someone tell me why, when opening PanelPro and selecting the Roster tab, the top of the selection list is “Open DecoderPro” rather than

Thank you so much.

I now get this issue every time i load jmri. Now the window error message of failed to create throttle instead of being empty now says the command station didnt respond. This profile will no longer

I am now entering the proper thing as you indicate. I am getting messages in system console from the dispatcher but speed calculation info seams missing unless i just dont understand it. Starting new

Thanks everyone.Each response appreciated and noted. I will do some further investigation and report if anuthing changes. Kind regards. Peter

Hi Chris, Thanks, I've located the LogixNG Dialog in question. Potential fix uploaded to: https://github.com/JMRI/JMRI/pull/14055 Fix for the About Window uploaded to:

Hi Tony, In the console log which you posted on another thread, you had entered *jmri.jmri.dispatcher* It needs to be *jmri.jmrit.dispatcher* Steve. -- Steve Young, Member JMRI Dev Team

Hi Ken, I'm running the signals as [to quote the NCE Light-it documentation], "Using the Light-it as an NRMA conforming signal decoder". Thus they are programmed [addressed] under 'signal address

Dave Do you know how i can trace what dispatcher is doing to determine engine speed? Are you able to look at the software code and determine the algorithm being used when dispatcher users head and

Tony, The LogixNG messages are from a year or two ago when I was helping out. To stop them, go to Tools -> Tables -> LogixNG. Uncheck both entries. This will stop the LogixNG messages. Do a

Ok But where do i see the data of the speed changes? After entering what you said the system console does not have any info on the calculation of speed as indicated in the data i sent. You say to get

My notes refer to Warrants and OBlocks because that's what I use - ignore that. You will input *jmri.jmrit.dispatcher* ( which logs dispatcher)? ?instead of jmri.jmrit.logix (which logs

Dear Mr nag You’re confusing me. Do i enter ‘jmri.jmrit.dispatcher Or jmri.jmrit.logix Or both ,one after the other I dont use warrants or oblocks -so why would i log them. You say copy