开云体育

You may not be able to install JMRI Windows in S mode is a streamlined version of Windows designed for security and performance, restricting app installation to the Microsoft Store and requiring

I didn’t know about S mode either, so I googled and found

Gang, my old basement laptop was calling it quits, so a new one has arrived. Before I install JMRI, is there anything I should be aware of? New machine is windows 11 in S mode which I don’t know

Hi, I had something a bit similar with my Windows 11 laptop. The JMRI Panel Pro 5.6 startup got stuck after I'd added an NCE Power Pro connection using a USB to serial adapter and then restarted

Thanks for the speedy response Dave. Ok I'll add that but the throttle ID in the IM was 1111. Why is that invalid? It's not part of my roster but im using it or testing.

Vinny, You are not checking to see if the throttle is valid. if self.throttle is not None: self.throttle.setIsForward(True) else: print 'Unable to get throttle for

...just realized that after this error, now I cannot control Turnouts from the CPE. this happened last night for the first time ever. I rebooted TWICE and got things working again and now it has

Team, attached snip of script where the error is occurring. Funny thing is that it works fine 90% of the time. -- Many thanks in advance! Vinny DeRobertis ~ Apex, NC New York & Hudson Valley

Another idea is to add a new "Car Type".? That's done via the *Cars* window, by selecting the "Add Car" button, getting that window, then clicking the Car Type "Edit" button. Type in your new car

I am having a similar problem.? I've run decoder pro for many years and have a roster of over 100 engines.? Yesterday, I was using it and everything was working fine.? I then shut it down and about

You must have changed something for this to happen.? Can you recall any changes at all you made to JMRI or your computer setup between when everything worked and you noticed your issues? -- Tom

Dick, I read it differently. I quote: "It became necessary to RE-install". That implies an existing installation, with (who knows?) any of panel files, scripts, roster, profiles, connected hardware.

Test release 5.11.5 of JMRI/DecoderPro is available for download. This is the next in a series of test releases that will culminate in a production release, hopefully in June 2025. It's really

Still need where speed can be controlled when using automation Tony

Wouter, He is not trying to get something that was working working again. He has upgraded to a completely new machine and installed from scratch. What I am suggesting is that he shouldn't try to

Don: True, everything seem to be working now. Thanks, Joe Sent: Friday, April 11, 2025 6:55 AM To: [email protected] Subject: Re: [jmriusers] Paragon4 (400a) Decoder Programming

*So, what type of turnout are you using? -* All signal masts are controlled by CT turnouts (CMRI Network). All signals correspond to their CT values as intended and function as intended when the

I could not disagree more. Much better to get working what was once working (albeit on other hardware), than to try to upgrade from something that does not work, in the (guaranteed vain) hope of a

A signal mast that is only a SML destination mast will automatically display Stop. Dave Sand

So, "No, but yes". "No", because you are not uning "signal heads". But "YES", because you are using "Output Matrix Mast" signals which each can use multiple "Turnouts". So, what type of turnout are