开云体育

I found that if I drew a selection box around the invisible marker that it would appear as a tiny yellow box. Then if I right clicked the yellow box a popup menu would appear giving me a couple

Thank you Dave, With what hardware I have (under the table) I'm trying to get the most effect above the table. As switch machines and sensor get installed. the effect will be more

Can I ask why you would want to remove a turnout dynamically?

Erik, Someone might be able to look at this properly if you post the log-file for a session where you can't read a decoder. Meanwhile, it's best to stop re-installing things. It does not help in 99%

Last night I deleted paths and SML, removed/replaced masts and turnouts. After a rebuild it worked correctly. Nothing is obvious comparing the two files but as you imply there was something making the

Helle again, I have nor reinstalled JMRI with the newest Java V17 and it still does not work... Any Help from JMRI ?? Erik

Hi Ralph, Can you give us an idea of the circumstances in which you want to do this? I'm totally nonplussed trying to think of a use-case, as the "normal" way of going about it would be panel

Think I sorted it out. Included an Execute Delayed in the conditional. Cycled through all the scenarios and Mast had correct aspects. -- H.O. Australia (Layout in Progress) Digikeijs DR5000

It appears that you have created an unusual condition. Based on looking at the Route Table, BD7 -> BD17 -> BD8 is being treated as a reverse loop. This is probably caused by three turnouts in

Nags, Yes. Dave Sand

Here I have three options to set the signal, their conditions resulting all being not active (as intended). For these conditions I have LogixNG to set the mast to an aspect I require. I suspect the

The purpose of the script appears to be setting the aspects of several masts based on the change of an occupancy sensor. Demo-v2.py makes it possible to set different aspects for each signal

Peter, I assume you are talking about Monterey. When you are running Monterey, can you open the xml file using TextEdit. The first couple of lines should look like the following: Maybe Dropbox is

I hope I get this working before you get tired of spoon feeding me!? I missed the double head selection,?? Thanks.

I can easily create turnouts, sensors and blocks but I can't delete them from their Panel Pro tables with jython. The only method I found while browsing the class structure was dispose() and that had

JMRI 5.10 on W11 I thought I would experiment with train tracking on a layout editor panel. I found that when the loco IDs are placed near a block that there is no indication that something has been

Hi All Would anyone be able to assist with this issue. History back ground I have been using windows 10 PC's ?for many years with no issues and dropbox to store the information. This has been

Steve, That's OK. Thank you very much. JeanLouisDelestre@... ----- Mail original ----- De: "Steve_G via groups.io" <RailRodder22@...> ?: jmriusers@groups.io

Bob, thank you for your concise troubleshooting suggestions. Previously I had tried using DCS100 as a command station selection and it worked as expected. I started from the beginning last night to

Jean Build 2264 or later, found here https://builds.jmri.org/jenkins/job/development/job/packages/. As with all updates make sure you have a backup before installing. Steve