开云体育

Thanks, Mick.? Enjoyed watching a couple of the McKinley Railway videos. That's quite an ambitious project, and it's fun to see where he's going with it.? I see he's using RFID to track individual

Is there a way to keep my model board “as-is” while reconfiguring some of the columns? David Olesen Hackettstown NJ

I'm finding the sensor trips the script, but... The log? is showing multiple events.... I do have the 'Delay to Inactive' on the sensor set to 60000 With this setting, I thought the code would run

here is where i stand now.... I need to split the routine of the signal changing... I'll put another sensor at another location to rest the signals to 'Stop Signal' instead of just waiting for a

Yes, making the changes to demo should verify that things are working. I assume that you are going to want this kind of logic for more than one occupancy sensor. I have expanded the script to

The following items have been added to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/dsand/Demo-v2.py (

OK I got this. 18:13:12,901 rit.jython.exec.AbstractAutomatonDemo INFO ?- signal one [__builtin__$SignalLogic$0] 18:13:16,704 rit.jython.exec.AbstractAutomatonDemo INFO ?- signal one

Ken, I believe he is asking about swiping the web panels in a browser, not JMRI panels on a computer. Vinny, It seems unlikely you really want the swipe to randomly select the next panel to show.

After you run the script, go to the sensor table and change the sensor state for the ISoccupancySensor sensor. Then you will see the messages in the SignalLogic class. Dave Sand

David, I ran the script. I got these results 21:48:03,160 rit.jython.exec.AbstractAutomatonDemo INFO ?- Start Demo [AWT-EventQueue-0] 21:48:03,210 rit.jython.exec.AbstractAutomatonDemo INFO ?-

Vinny, The concept sounds reasonable. But checking that that the swipe action is available via the Java look and feel for our three platforms would be the first thing to check. Sometimes there

Billybob, the scaling down to 100% worked,? thanks for the tip... John Yahoo Mail - Email Simplified Yep.? I believe it is a Windows and/or Java problem that occurs when the Windows computer

We use tablets with our panels on it lloyd 310 951-9097 <vinny.derobertis@...> wrote:

EngineDriver users, we've released an update for EngineDriver to the Beta program, v2.40.197. You can find the list of changes

I suspect that the issue is starting a multi-block section with a ghost block. This might also be an issue when ending one with a ghost block. I prefer to use single block sections. After creating

Hi Bob, I should have said I looked for the section named </connections and then found a section that started <connection that contained the connection for the NCE via serial

Hi Bob, I had a similar problem the other week when I tried to use a USB to Serial Adapter (for NCE Power Pro 5) with JMRI 5.6 on a Windows 11 laptop. I solved the problem by editing (in Notepad++)

Team, I have about 70 control panels and I navigate them using buttons with links. While this works fine, I can see my panel count only growing with time. The thought occurred to me of the possibilty

I started tooo last night.... THan k you.

I think I finally learned enough to make it thru SML but am stuck on Dispatcher which may be related to ghost blocks. I made all turnouts ghost, added sensor and have no logic although I show the