开云体育

If you have logging turned on, you can look to operations\logger\rollingStock and find the car you're looking for. it will list, in csv format, all of the moves of the car since you started logging.

Thank you, Daniel. I had yet to find the documentation for lighting controls from LogixNG, and the cited example of triggering light objects based on the fast clock was?very helpful. I hadn't

The issue I had found with DMX was that not all DMX dongles are equal. But worse, I was working from Windows systems. Due to lower level libraries the only way I could get it working was: 1. On

Look for the McKinley railway on YouTube. Mick ______________________________________ Mick Moignard mick@... p:+44 7774 652504 The week may start M, T, but it always ends WTF!

Paul, I don't know the answer to your question. But I think there has been progress in this matter. full WW. based on the fast clock time. require either a LogixNG or Python/Jython script that

Paul, I have reviewed your upload. Block 1 includes track segments attached to the connection points on the slip. The subsequent anchor points create block boundaries. SSL requires signal heads at

Thanks.? Ill try that next time I go into the layout room! Bill

When you reopen the file, is the new field length still modified?? Make a small change in the Setting window and press save.? The operations.xml file should contain the date and time of the last

"boxcar-materials" will print as "boxcar".? And "boxcar materials" will print as "boxcar materials". Dan

The "Last Field" is the last time the car was moved by the program.? It has to be part of train, and then delivered? to a track.? The program also doesn't increment the "Move" count when you

Vinny: Might it be caused by the settings on your tablet? Does it have options that select different responses for swiping? It looks like the zoom setting is being changed or perhaps you are switching

Greetings All, After an extended late-night dive into the group archive, I can't seem to find a final word on whether the JMRI DMX-via-USB support (whether Anyma or Powerline) works when using Java

These'll be fun to watch, too.? However, I'm sure the one I'm looking for is done by a modeler from the UK, and the train which starred in the video was a steam engine of British heritage.

Thanks Brian, but 3 years ago I wasn't active in model trains.? It had to be at least 6 years ago and most likely ten or more years. It'll be fun to watch your video, though!

The following items have been added to the Files area of the [email protected] group. * /ProblemsBeingWorkedOn/240499_Paul_Young/ONEFORTYONE.xml (

The "source code" for the "Turnout control" is found at jmri.jmrit.simpleturnoutctrl.SimpleTurnoutCtrlFrame.java . This is Java code, not "Jython", so it would not be "directly" usable as a

I did several YouTube videos showing train operation and my JMRI Panel Pro Dispatching set up. Try this one and then you will see a few other older videos that might also be of

Hi, I am in the middle of prototyping my own DCC Accessory decoder hardware (using MicroBahner's DCC_Zubehoerdecoder software) and I would like to be able to adjust CV's and switch outputs from a

Raymond This may or may not be the video to which you refer, but here is a link to a video I made about 3 years ago https://youtu.be/a44Fs8CCgls?si=bOJEH09TjpyDNEVL I originally made it in support

Use "Tools -> Where Used" from the main PanelPro menu. Dave Sand