开云体育

The "source code" for the "Turnout control" is found at jmri.jmrit.simpleturnoutctrl.SimpleTurnoutCtrlFrame.java . This is Java code, not "Jython", so it would not be "directly" usable as a

I did several YouTube videos showing train operation and my JMRI Panel Pro Dispatching set up. Try this one and then you will see a few other older videos that might also be of

Hi, I am in the middle of prototyping my own DCC Accessory decoder hardware (using MicroBahner's DCC_Zubehoerdecoder software) and I would like to be able to adjust CV's and switch outputs from a

Raymond This may or may not be the video to which you refer, but here is a link to a video I made about 3 years ago https://youtu.be/a44Fs8CCgls?si=bOJEH09TjpyDNEVL I originally made it in support

Use "Tools -> Where Used" from the main PanelPro menu. Dave Sand

My sensor table shows a lot of internal sensors numbering up from IS5000.? How do I find out what eac one senses?? What turns IS5000 on and what turns it off?

OK, here's an off-the-wall question: I had a break in my hobby from ten years ago to about two years ago.? I am now back to working on JMRI and trying to automate some trains.? I rememberr seeing a

I have a few observations: * In Preferences -> Defaults, I see two entries for Marklin-CS2. ?The second doesn't have any radio buttons selected. Probably just cosmetic. * Tools -> New Throttle allows

I use virtual classification tracks in my yards so that I can see which cars are potentially assigned to outgoing trains.? This build I noticed that one of my trains was oversubscribed by 100% so I

The logging function records all car moves.? operations\logger\[date].csv

Bob, It works perfectly! ?Thanks! I really appreciate the effort you put into JMRI, especially the support you give to obscure (in the US) hardware. Regard, Gopal

Clarification For car type I can enter ‘boxcar-materials’ but when I try to enter car type ‘boxcar materials’ it limits me to 12 characters. -- Mike from Calgary

Could you try the installers at https://builds.jmri.org/jenkins/job/testreleases/job/bobjacobsen/218/ please? I don’t have a good way to test a CS2 TCP connection, so I’m not sure these will

All, I've gone back to using my standard Basic Signals Masts and all is good.? Just to be clear, the B&O masts were looking at next THREE blocks in determining a stop aspect. Roger

...and this can happen on all of my panels.

...note that I using the Fully Kiosk broswer on samsung android tablets.

Team, I've got a bunch of Control Panels that I view on Tablets all working fine and there is a slight annoyance that occurs when I inadvertently swipe the tablet screen and the whole panel moves

Robin, I think I had picked "Approach Medium" in the B&O mast aspect.? I unchecked the others.? I didnt see one that had just "Medium" aspect. Will delete the masts and choose a simpler

Hello, I would like to use the TCP protocol to connect to a M?rklin central station 3 (or, in my case, ?a surrogate). The current JMRI implementation uses UDP which has been deprecated in favor of

Roger, Take a look at the Signal definitions for your chosen system at www.jmri.org/xml/signals <http://www.jmri.org/xml/signals> . Then pick the exact signal mast you put on your panel and look