开云体育

Bill S, The 7.3.0 in the log says you have no jumpers on the NCE USB. That code tells JMRI that the system is a PowerCab and it has the old 1.28 firmware.. The error message says that's not what

One thing I noticed is that if I define the devices in the udev rules as lower case names (dccex, tchlcc), then the names show up in the jmri config menu for the serial ports, but jmri still can't

No good.? I tried changing just the config file to use ttyDCCEX and ttyTCHLCC, as well as changing the udev rules to create ttyDCCEX and ttyTCHLCC.? The devices get created as defined, but still

Joel, Try including "tty" at the beginning of the device name, i.e. ttyDCCEX. Dave Sand

Thanks Dave.? Unfortunately, that didn't work either.? According to the comments in jmri.conf, for linux I don't need that path "/dev/", but I tried it both ways, using /dev/DCCEX as well as DCCEX,

Joel, Try using jmri.conf. Copy the installed version to ~/.jmri and modify it. default_options="--serial-ports=/dev/ttyUSB_NCE_PH_Pro, /dev/ttyUSB_PowrCab” Dave Sand

I'm trying to get my new dcc system recognized by jmri running on linux.? Based on my reading of previous messages, I have my udev rules configured to create /dev/DCCEX and /dev/TCHLCC, and in my

I think it works like this....... Setting the Jumpers will set the Interface to All Systems......... If the PowerPro has the 2007 Firmware it should work If the PowerPro has a newer firmware the

Will be very useful for me. -- Tom

The new feature now allows a train to only perform local moves at a given location in a train's route.? That wasn't possible before.? The train build option for local moves was all or none, now you

Bryan, If you don't mind a couple of pop-ups to answer each time you move the cars into OFF LAYOUT, just set the length of the two spurs to 0 feet.? This should keep the analysis tool happy.? As I

Use the RSS feed, /g/jmriusers/rss, and a plugin for my web browser to list messages new to me then click through the link to those I consider of interest. -- Chris White

I use the daily email digest. This give me a summary of the posts of the prior day. Easy to pick and choose which to read. In this way I monitor about 15 groups and it takes only minutes a day (not

This is in the log: 2025-03-09T08:34:45,387 nce.NceConnectionStatus INFO - NCE: NCE EPROM revision = 7.3.0 [AWT-EventQueue-0] 2025-03-09T08:34:45,389 nce.NceConnectionStatus

Way beyond that level of troubleshooting… we’re into firmware updates, and detail analysis…

Byran, I have created a ‘spur/track’ which is a box for my cars that I rotate of the layout. Example I have a train that brings 5 cars on at the start of an operating session, then I

Did you change the Jumper setting? I think there are jumps that need to be set on the USB Interface to work on all systems. I thought there were exclusions to that the USB interface could send and

John, I did a test with 5.11.4 and linking works fine. If you don't get the second dialog, look at the system console. Here is an intentional error: 22:21:19,009

This is the first I've heard of this tool and glad to learn more about OpsPro! Situation - some of my cars were not only "out of service" but also off layout (on the bench - the real RIP track!) and

Dave, I tested 5.11.4 trying to creating a link between two edge connectors as Stewart did and I am not seeing a dialogue box to complete the linking process either. I have created links in the