开云体育

Hello, Have you added your user to the 'dialout' group? Typically this is a necessary step for running any software not as the root user that connects to a serial port on Linux. Best, Noah Uncommon

Is there a place I can download it from ? (I wondering if its messing with gmail ) From: jmriusers@groups.io <jmriusers@groups.io> on behalf of Georgia Hilton via groups.io

Did you send to MTTFGEO@...<mailto:MTTFGEO@...> ? I apologize, I’ve checked all my junk, spam, etc I don’t see anything from you… can you try one more time

Geo, I've sent the files to your personal address, a couple of times. Make sure you check the junk or spam folder in case your mail system didn't trust me. -Ken Cameron, Member JMRI Dev

I’ve noticed this happening a lot. Usually if you minimise and then restore the window, suddenly it works again I’ve put it down to “one of those things” Phil G

Dave, Roger that! Dennis, You're in the proper hands... <veers back into his own lane>

The manual says 60 cabs. I don't recall if the max was 60 or 59. So I tried a test and found that while it accepts other numbers on the cab, 59 is the highest one that seems to respond. That's with

Well! How embarrassing! I went back to try the window opening and now it works. Possibly because I restarted the RealVNC client. David T

Using recently downloaded RPi image from Steve Todd, when I try to open a PanelPro menu item such as LocoNet, I get a flash but the menu never opens... It returns to pre-clicked state. I am using

Com 9 From: jmriusers@groups.io <jmriusers@groups.io> on behalf of Georgia Hilton via groups.io <mttfgeo@...> Date: Monday, March 3, 2025 at 18:36 To: jmriusers@groups.io

Yes please. You can send to mttfgeo @ gmail.com Cheers Geo From: jmriusers@groups.io <jmriusers@groups.io> on behalf of Ken Cameron via groups.io <kcameron@...> Date:

Further to previous, this is the terminal output during startup. [image: image.png] googlemail.com@groups.io> wrote:

Pete, This is a Layout Editor panel. There are no icons for track components. They are drawn using Java graphic tools. Dennis, Instead of switching to edit mode, try changing the window size by

Dennis, When the initialization has finished and if the image shows no track segment, go to Tables and look at the sensor for block 103 and see what its status is. I still wonder if the actual icon

Kevin, Read this and see if it helps: https://hostlersinn.blogspot.com/2024/07/loksound-ditchlight-alternately.html gmail.com@groups.io> wrote:

Oops, forgot the image. Cheers, Dennis Drury Dayton, NV The miracle is this: the more we share the more we have. Leonard Nimoy gmail.com@groups.io> wrote:

One other thought. The block occupancy is shown by the track segment turning red. The black lamps are part of the NX system. They show when a route has been entered then go out when the movement is

Thanks Dave and Pete. Good ideas on the initialization but the attached image shows the panel after the init script has been run. It's easy enough to enter and exit edit mode to correct the issue

On the new command station. ?AIU addresses must be 60 or less. ?(or was it 59)

I have a Raspberry Pi 4, which I would like to run my layout from. I have Ubuntu 22.04.5 LTS installed. I have JMRI 5.11.3 installed. I will be running on MERG CANBUS. I've been creating my layout in