开云体育

Good luck. -- H.O. Australia (Layout in Progress) Digikeijs DR5000 LocoNet JMRI v5.10 DecoderPro/Warrants/CPE/SML/LogixNG Java: OpenLogic jre-17.0.12.7 ? Windows 10

For Logix based initialization, I use the LRoute RTXINITIALIZER. This creates an IX:RTXINITIALIZER Logix that can be modified to perform any number of initialization actions, including things that a

I think we need more info. (Unless you just need a few ideas and can figure out what to do with a simple hint.) "All your own signal logic"? Is that logic that is implemented as Logix which

Lou, The easiest solution is to have an initialization Logix that sets the branchline signal to Stop. Dave Sand

Hello, I currently have my entire layout programmed for CTC or ABS using all my own logix. I have one signal on a branchline, which protects the mainline, that does not have any sensors near it, so

Oh, so JMRI is no longer opening at all? If so, there is likely an error at startup. See Dave Sand's reply concerning providing the messages.log file. That'll help someone find a solution for you.

I am not a computer person. I looked at trying these suggestions but essentially do not know how to get to them. In my Library folder there is the name of my railroad but there do not appear to be any

Actually, it seems that opening ANY of the .shtml files as a "file://" URL causes this looping. Looking for an .html file to test now.

Phil, I can duplicate it simply by opening FireFox on the RPi and pasting your first link. file:///home/pi/JMRI/help/en/package/apps/AppConfigPanelErrorPage.shtml Then new tabs are opened repeatedly

Steve, This is maybe the resaon why the train on Bypass stopped in front of a green signal : 16:53:51,424 jmri.Block WARN - count of 2 ACTIVE neighbors with proper direction can't be handled

It was a connection error It’s not the triggering of the help page that’s the problem though It tries to open the first of the links I posted, then the second one, then the first one again, then

Phil, What is the "startup error"? Connection errors always trigger the help page. Dave Sand

Update: It seems to loop between two pages file:///home/pi/JMRI/help/en/package/apps/AppConfigPanelErrorPage.shtml file:///home/pi/JMRI/help/en/index.shtml Phil G

Steve, Thanks for your patience. First, I have upgraded my java version to 17. Then I did what you said. At first the trains were running fine, sharing some tracks, but when I tried to

This has been happening for a while, but when I start JMRI on my Pi with a startup error, JMRI tries to open a help page from /home/pi/JMRI/help - repeatedly In fact it keeps trying to open files

Does anybody live in the Reading PA area who could get my JMRI re-installed and working? ?I had been using it successfully for years, ?on at least 3 different Windows PCs, but when I tried to update

attached

Gene, My guess (hope?) is that you've somehow ended up running the wrong config profile. Hopefully your old profile still exists. Use Edit, Preferences, Config Profiles to look for it and Activate it

... after experimenting, I found that the anomaly of not being able to select the line occurs after the line is rotated. I went into the XML and deleted all the lines (polygons) with degrees="##" and

Basically the only safe way for dispatcher allocate through a double crossover is with the crossover having one, two or three blocks, and every section though the crossover involving 2 switchs and a