开云体育

Thanks Dave, Much appreciated Yves [email protected]> wrote:

Looking at your Manifest, I now see how you got the locomotive to print in black.? You eliminated the prefixes for both engine pulls and drops.? Yes, that would have printed in black in the older

Micheal, As far back as I can remember, both the locomotives and cars where printed in color.? Not sure how you got the locomotives to print in black.? Here's the results using 4.26, the oldest

Within one of the last handful of test releases of JMRI, my locomotives have turned color! When I now preview or print a manifest, the listed locomotives had always been printed in black at both

...and come to think if it, I experienced some of those inconsistencies in the past but brushed it off... it all makes sense now, thanks again.

Ok cool, Bobl! Thank you for the improvement and quick reply! Sorry I didn't see that in the release notes. It made me motivated to upgrade my windows7 box so I can get to java17.

If you look in the roster.xml file you will see the filenames being used e.g. imageFilePath="home:JMRI-Files/JMRI-Roster/roster/CNR1026.jpg" All our files have the same relative path from the users

Bob You likely have the images in different places for each pc. They need to be stored in a relative path to the files section or roster. So they appear as roster:: or files::. Steve G.

Bob, Sometimes I do run both at the same time, but not normally. While trying to resolve this, I have tried it while running both and while running just one; no difference in the behavior of the

This is a change in release 5.10. From the release note: ? The "Scale" operation on icons has been changed to a relative scaling from the current size. For example, if you've scaled an icon by

Are you running JMRI on the two computers at the same time? Bob

Eric, You have added new variables with ONESENSOR and DIRECT. When a xml data file is loaded, the turnouts will have an UNKNOWN state. For turnouts using MONITORING, JMRI will request the state

Thanks, John.

IIRC the roster is a text file, or is it just the entries are txt, if so open it with notepad then copy and paste in excel Tony

Dave, That worked -- thank you!!! Best, Isaac

Mark, Read this: https://hostlersinn.blogspot.com/2023/01/exporting-jmri-roster-to-csv-file.html It's the only available way that I have found. [email protected]> wrote: -- John Griffin The

Dave, Setting the conditions of the test as you state if: 1. turnouts configured in Monitoring or One Sensor Mode, the state in the turnout xml table tends to match the physical state - or at least

It is 5.10. I will revise.

Is that really JMRI version 5.1, if so which version of 5.1,x - 5.1 is a series of test releases. If you meant 5.10 production release then don't leave off the zero - a lot of people seem to do this,

Team, I have lots of icons on my panels. Typically I am able to scale them up/down with no problem. Just recently I went to an existing panel with an existing icon and changed the scaling from 80% to