开云体育

Vic Ignore JMRI for now. Once the correct COM port is known you can attempt to use JMRI. Make sure the old DCC++ system is unplugged, and don't plug it in yet. Also make sure the new DCC-EX system

Ash__ Here we go : Despite the route command "All closed" one turnout is indicated as Inconsistent. As asked, I uploaded the file on

Here is the system console display from the export. 23:58:45,404 jmri.jmrit.jython.exec.ExportLogixNG ?INFO ?- Run LogixNG Export v1.0 [AWT-EventQueue-0] 23:59:23,044

I am new to this group. I have been using JMRI for a number of months with a DCC++ base station constructed using an Arduino UNO and an Arduino Motor Shield. I use it only as a basic throttle and it

Seth, The system console fragment indicates that you have a bad export file. The required content before the LogixNG elements is missing. BTW, the full console log is recommended since that

Doug. If the problem was in the decoder it would be the same on any track. Your case sounds like bad pickups or not enough contact with the track. Tony

There are a number of issues that need to be fixed. Step 1 -- Use Java 17. This is the recommended Java version for JMRI. Step 2 -- Replace JMRI 5.2 with at least JMRI 5.6. JMRI 5.2 (and maybe

I just got some really strange text messages to me Cell phone relating to JMRI, SSL, and IIS. Is anyone else getting these? -- Robert Heller -- Cell: 413-658-7953 GV:

I used the lastest beta of JMRI Panel Pro to export the LOGIXNG from one profile to another.? I only edited two block names in the exported xml file to match new block names in the newer profile. I

I am moving this to a new thread from where I had wandered off topic on my thread about a Parse Error on Reporters (Now resolved). This one seems to be limited to one Block on one Panel of My JMRI

I need to apologize.? I am still getting used to this forum and was about to add another post when I looked at the subject line and realized I had wandered off topic in my own thread. As to the

In one case, I found it was a power pickup problem.? The steam loco had no pickup capability, and the tender was too light.? Addng a couple small fishing weights to the tender sollved the problem

Ok, I know this isn't the group specifically for decoder discussion, but since I'm pretty sure most or some of you all run N scale and steam and BLI steam; I'm asking anyway. We all have had trouble

Several years ago, I dug up an old HP 10 inch netbook from 2010.? Upgraded with a 2G memory card, an SSD and installed windows 10 then JMRI. I still use it at train shows to automate my 5x9 layout

Stephen, The search within JMRI help is a keyword search. The search within the jmri.org web site is based on Google search capabilities. The contents of the "jython" directory included with the

I did finally get a result but it seems very limited. In the screen shot you can see I searched for scripting examples and it was not found. If I searched for scripting it was found. If I wanted to

Stephen, Are you referring to searching at the jmri.org website or within a JMRI help screen while running DecoderPro/PanelPro? A screenshot would be helpful. Dave Sand

I have never found a solution to my searches with the JMRI help search function. Always comes up with some form of not found. Is there something different about searching in the help system? Never

@Steve, Thanks for your suggestions, especially the very informative link /g/jmriusers/message/152623 "Dispatcher, Signal Mast definitions (BR-2003) and speeds". I think that this has

You might have a block that's joined 2 ways to another block. Like a reversing loop with the y in one block and only one block in the loop. Steve G.