开云体育

John, Since you have issues with file management, I would recommend doing the stores with a new name. Dave Sand

Dave, Update... I checked for the correct address in line 1 ( <?xml version="1.0" encoding="UTF-8"?>) in a more recent panel file (Aug23-24). It had the correct line 1 so I loaded that one. I went to

Thanks for the reply, Dan.? When I bring up the first ROUTES screen, I know I have to put in a name first, then hit ADD ROUTE.? As soon as I do that, the STATUS button shows an ERROR and I can't put

Dave, The copy of the file (Aug20-2-24) in the "Load Tables and Panels" screen, does not open properly. If I am to use the copy that is in Windows File Manager (it has the <?xml version="1.0"

Brian, my first test is: Can I control that locomotive with a JMRI throttle? (Tools -> Throttles -> New Throttle in PanelPro, Actions -> Throttles -> New Throttle in DecoderPro, I believe) That will

For more info on adding a route and the locations see: ( https://www.jmri.org/help/en/package/jmri/jmrit/operations/Operations.shtml#AddRoute

I'm looking for suggestions as to how to troubleshoot a failure of a WiFi Throttle to communicate with an NCE PowerStation command station. Information behind the problem: * TCS Throttle can connect

Doug, Do you get this window after you've hit the "Add Route" button in the "Routes" window? The next step is to select the departure location for the route added, then the next location using the

I am brand new to OpsPro and have run into a snag.? I want to start very small and minimize the screw-ups if possible.? I have managed to successfully make it through SETTINGS, LOCATIONS, CARS and

Mac sequioa is 15.0.1 Jim

Where do you expect car ACFX 72089 to go?? If Dunn Papermill, the setting for inbound cars from staging is set at 100% which means that only one car (44 feet of track space) from staging is

On my panel all turnouts are within a block, not their own block. The thru and diverging tracks from the turnout become separate blocks although in some cases I have simply continued the 'mainline'

Hello again, I got one set of build fails cleared and am now onto this issue. ?I have attached a build report for your reading pleasure :) it seems that the program is not using off spots for extra

Hello ALL! So I was able to find and correct problem of previous build fail. now onto another build fail issue. I will start a new topic. “Build fails…not using off spots or holding

Thank you for your help. ?Following this advice on aINTEL IMAC machine running Sonoma 14.6.1 ?I found problems with the ports. I hooked up a new. Apple M3 running Sequoia 10.0.1 and everything is

John, Q1: I change the global turnout speed for thrown. I don't see an issue with adding your enhanced signal system to JMRI as long as it provides consistent aspects using the default turnout

I did a trick with the multi-sensor for a vertical storage track system. It had 4 icons, one each for the three different alignments and the fourth was 'Moving' in a flashing icon. When the turn

I have uploaded my file. In an effort to setup a new engine, I some how messed up my connections. I created a new connection for my Power Cab, which is only used for programming on a program track.

Dave Sand: ?Thank you for the response and very helpful information. ?After digesting your suggestions I now better understand the influence of speed in "our Aspect" selection. ?They also prompted

When a train is a turn, the train's name doesn't change even if the lead loco is swapped at the end of the branch.? Not sure why you would need the consist name to change, you don't need to show it