开云体育

Hi, Perhaps I should have elaborated on how I have things set up: Jmri 5.6 Java 11.0.18 Windows 11 DCC Command station Merg via CBus Sensors Merg via CBus Turnouts via DCC I have set up multiple

Thanks for the responses, confirmed my thoughts, just wanted to double check. Darren

Trevor, do you know if the jayton script can be translated into LogixNG? I much prefer that than using scripts. Thx Leo P <directorsixfive@...> wrote:

This is a normal situation. Once one train allocates the crossing it will set the switch's. The other train will not be able to allocate the crossing until the first train has cleared and released it.

Gord, You've attached the same build report from your previous post.? No build failure.? However, the date the train was built is back in June.? You're not retrieving the latest build report for

Trevor Thanks for the reply! I will investigate! [email protected]> wrote:

Keith: I have layout lighting changing from Moonlight - Dawn - Morning - Noon - Afternoon - Dusk - Moonlight using 2 LIFX WiFi enabled mains powered RGB globes (1 in the East and 1 in the West). The

Hi Dan, Attached 'build' report. This problem is not specific to this train only.? When I 'reset' another train, the same situation occurs, train won't build, and "current location" of train does

Vinny, Thanks for the reply. I will look int this, but 700 is pretty steep! <vinny.derobertis@...> wrote:

Dave, Thank you. I took a quick look at the file this evening. That's what I was missing. That I had figured out. I'll be taking a much closer look tomorrow or the day after; especially to the

John, Thank you for finding that! I confirm that bug and it's fixed in PR #13423. https://github.com/JMRI/JMRI/pull/13423 Daniel

Again, provide the train build report in very detailed mode for the train that failed to build and we'll look at it if you can't figure out why. Dan

Daniel, As a follow-up from Subject: Mac Java 17 upgrade caused permission issue Subject: Password on files? With the "Guest user" not having permissions I would get “Permission Denied” when

Hi Dan, In my OperationPro 'settings', both 'auto save', and 'auto backup' have been selected. I 'restored' an 'auto backup' file previous to 24-07-30.? Now I can make changes in Car, Routes,

Richard, The details about the JMRI objects are in the Javadocs: https://www.jmri.org/JavaDoc/doc/ This list of "shortcuts" in the initial help page are the "managers" for common JMRI objects. For

Thanks Dave. I’ll give the Sensor Table approach a try. Regards. Derek.

Derek, There are a multitude of initialization solutions using LRoutes, Routes, Logix, LogixNG, or scripts. The easy solution for internal sensors is selecting the "Initial Sensor State" menu item

Good Day I have created an internal sensor IS4 on my PanelPro layout diagram. I want this sensor to be set to INACTIVE on startup of JMRI. This sensor, when manually selected, will indicate the

I use a Pricom Design "Layout Lighting Solution" (LLS) board as a DCC/DMX gateway. It connects directly to the DCC bus and translates turnout commands from JMRI to control DMX devices. It has an

David, "I would use a script to start the train using the train info file. There are options to override some of the defined fields, such as the DCC address or roster entry. " That's what I hoped