开云体育

Bob and all, So far everything seems to be working. After installing the debug build I restored my profile from a backup. upon restart JMRI rebuilt the decoder index and completed the startup (at

Could you try JMRI 5.9.3 please? It’s got a fix to allow more outstanding messages: https://github.com/JMRI/JMRI/pull/13308 That fix was merged after the development release you’re using

Bob and all, Sorry for the delay, I was out of town. Will try it and let you know the results. I'm using Windows 11. Gil

Chris, It might be that JMRI closes the connection when it times out. The log you sent before had these lines: Can't publish : [AWT-EventQueue-0] response from the server So it could be that the

Darren, Totally separate address ranges. And the IS range is completely free as it is JMRI internal. -Ken Cameron, Member JMRI Dev Team www.jmri.org www.fingerlakeslivesteamers.org www.cnymod.com

Hi Daniel - it appears to be JMRI that closed the connection - 2024-09-03T19:03:14: Client TheLoftJMRI8EB8A1FEM closed its connection. There had been a high volume of messages in the minutes leading

Chris, What happens is that the connection gets disconnected. Can you look at the logs for the MQTT broker to see if it's the broker or JMRI that disconnects the connection? The important part of

Not really. David was the one that kept all that info and research. We talked about it. I remember at the time, and this goes back pre-pandemic, I had found a company in Italy that from the looks of

Hi! I discovered the other day that the MQTT timeouts and exceptions are not specifically connected to startup - they're actually caused, I now believe, by a high volume of MQTT messages being

Leo, Do you have a link to DALI? And information on where to buy it? Daniel

- "IS" numbers are not directly associated with any "LocoNet" address, so are not restricted by LocoNet limitations in _any way_. In general, JMRI objects with "system names" that _begin_ with "I"

With a Digitrax system, I'm aware that LT1017 to LT1020 are resevered for Loconet use, however is there any issue using LS or IS in this number range? Thanks, Darren

Ken, the late Parks really liked the DALI lighting control, which is newer than DMX. Since this format is mostly in Europe, has anyone in Europe tried with DALI. (or hopefully here in the

Heiko, Thanks for the reply. I visited a shop in Innsbruck and got hooked on Jagerndorfer models. I have a Tauris and set of RailJet cars, my first experience with non-Digitrax decoders. Being in

Keith, The trick is a lot of DMX interfaces exist, but many have slight differences. JMRI will work with it IF you find an interface that supports a serial type interface. Yes they are USB but for

Using a bunch of Logix I had added the short sounds for the different toggles or buttons. Just the click and clack of their movement. This was done to help the user know for sure they turned the

https://www.jmri.org/help/en/html/hardware/powerline/index.shtml

Group, I am interested in building a lightng control system to work with a fast clock for my layout lighting.? I am interested to hear from others on the group if you did it, and are you satisfied

Doug, I use Logix to create a sound file for the action. In this case a CTC switch Sound: Logical Expression: R1 Sensor "IS:CTC:SW" state is "Sensor Active" (Triggers the calculation) Actions On

Great information. I use the commands in the withrottle protocol where they exist, roster speed direction etc. what I would like to do is adjust acceleration and deceleration settings. Which I was