开云体育

If DeciderPro can’t tell the difference, then the cvs it’s read aren’t telling it enough information (or more likely SoundTraxx don’t provide enough information) to tell them apart Do you

I did a decoder read and it gave me multiple possible types, how would I find exactly which one or does it not matter? -- Cheers, Wilks

I just purchased a new Athearn RTR SD40-2 that came with a Soundtraxx sound decoder. When I put it on my stand alone programming track which is connected through a Sprog 3 to my computer and go into

Decoder locked? Mick ________________________________ Mick Moignard m: +44 7774 652504 Skype: mickmoignard The week may start M,T but it always ends WTF.

Reading will not work without the motor load. Wouter [email protected]> wrote:

First, do a read type from decoder to get the correct decoder definition. This might be so old there is not a proper set of features in the decoder. Early decoders had some odd feature sets before

MFRC522, Ethernet/Serial, Nano/Uno/Mega, MQTT??? Guys, Yeah, you read that right! I have been playing around a LOT with MQTT lately and getting stuff to work with JMRI. So this evening I decided to

Hi all, First post here! I just need some help with how to properly identify a sound decoder, using JMRI connected to a DCS52. I tried to find PCM decoders on JMRI but couldn't, and the closest thing

Usually, from the throttle type (one hex digit) and from the throttle itself (the other hex digit). Some older throttles have rather limited values, while others provide more variable throttle

On 3/15/2023 3:36 PM, philip8944 via groups.io wrote: > On startup the system repeatedly attempts to throw 2 turnouts.? ive deleted the turnouts but it does the same thing with two more.? the

Dave, What do you mean by "amplified"? As far as I know, all of the features have help content. Dave Sand

Has the Logix N. G. documentation been amplified at all?

That idea works.? I put all of my classification tracks into one pool.? I do have to make decisions on what physical track(s) to put the blocked cars on, but I am ok with that and in fact seems more

Little information is supplied by the original poster about the decoder, the DCC system (if indeed there is one) and as you point out Thomas, version of JMRI. The first red flag in this thread is

First off, sounds like you are just writing. Put a Lok on the programming track, select new entry, then read type from decoder. That should read something from the decoder. If that does not work, the

Seeedstudio 125KHz, Ethernet/Serial, Uno Micheal, Actually, the Ethernet shield type (W5100 or W5500) shouldn't even matter since the 125KHz readers don't use SPI. To get you started, upload the

Blair, You better bite! LOL! It would be a BIG help if you jumped into the testing of stuff with us. Have a great weekend! Tom

Hmm.? I've just been 'gifted' an Uno, and both of those Ethernet boards; working status unknown.? Over the years, I've studiously avoided Ethernet.? But now all I need is a reader, or a few.

Micheal, OK, so like Steve mentioned, I need to know which Ethernet shield you are using (W5100 or W5500 based?). We should be able to get this set up and hashed out fairly quickly. :-) Tom

PN532, Ethernet/Serial, Nano/Uno/Mega Steve, Speaking of the PN532 sketch, here is my latest foray into that endeavor. I will tackle Micheal's 125KHz stuff too. *// Include Libraries* *#include