开云体育

Usually, from the throttle type (one hex digit) and from the throttle itself (the other hex digit). Some older throttles have rather limited values, while others provide more variable throttle

On 3/15/2023 3:36 PM, philip8944 via groups.io wrote: > On startup the system repeatedly attempts to throw 2 turnouts.? ive deleted the turnouts but it does the same thing with two more.? the

Dave, What do you mean by "amplified"? As far as I know, all of the features have help content. Dave Sand

Has the Logix N. G. documentation been amplified at all?

That idea works.? I put all of my classification tracks into one pool.? I do have to make decisions on what physical track(s) to put the blocked cars on, but I am ok with that and in fact seems more

Little information is supplied by the original poster about the decoder, the DCC system (if indeed there is one) and as you point out Thomas, version of JMRI. The first red flag in this thread is

First off, sounds like you are just writing. Put a Lok on the programming track, select new entry, then read type from decoder. That should read something from the decoder. If that does not work, the

Seeedstudio 125KHz, Ethernet/Serial, Uno Micheal, Actually, the Ethernet shield type (W5100 or W5500) shouldn't even matter since the 125KHz readers don't use SPI. To get you started, upload the

Blair, You better bite! LOL! It would be a BIG help if you jumped into the testing of stuff with us. Have a great weekend! Tom

Hmm.? I've just been 'gifted' an Uno, and both of those Ethernet boards; working status unknown.? Over the years, I've studiously avoided Ethernet.? But now all I need is a reader, or a few.

Micheal, OK, so like Steve mentioned, I need to know which Ethernet shield you are using (W5100 or W5500 based?). We should be able to get this set up and hashed out fairly quickly. :-) Tom

PN532, Ethernet/Serial, Nano/Uno/Mega Steve, Speaking of the PN532 sketch, here is my latest foray into that endeavor. I will tackle Micheal's 125KHz stuff too. *// Include Libraries* *#include

Tom I'm just pleased it's finally working! I thought we had a Serial only sketch that did list connected readers, or am I getting mixed up, there's been a lot of sketches! Lol! I guess modifying

Michael, Great stuff! Right, we need to know which Ethernet Shield you have bought! The sketches Tom and I have been developing on here use a Shield with the Wiznet 5100 chip. Tom already has a

OK, got it. I've been doing OOP since Simula-67 so that's a fine model for me.

Any sound decoder will require specialised hardware from the appropriate manufacturer to load sound files into the decoder. But JMRI can program the CVs of any decoder through an appropriate

This may well be because the original coding was to connect to the CS1 which did not have the alternative protocols available. It may well require modification to enable DCC mode for

I have been using Decoder Pro for some time now.? It is much easier to use when it works but lately, it is a headache. I can put a locomotive on the programming track and it will tell me the

I thought of that.? That is a good idea. -- Tom

Brian, I doubt that LogixNG will ever supplant Logix. However, Logix will probably never be enhanced. All new capabilities will be done in LogixNG. It is designed to be extended. For example,